[prev in list] [next in list] [prev in thread] [next in thread] 

List:       cisco-nsp
Subject:    Re: [c-nsp] Can not Ping serial0/0/0
From:       Mark Tinka <mtinka () globaltransit ! net>
Date:       2008-02-29 13:00:32
Message-ID: 200802292100.33328.mtinka () globaltransit ! net
[Download RAW message or body]

[Attachment #2 (multipart/signed)]


On Friday 29 February 2008, Ali, Rijas: BB UAE (IT) wrote:

> I just connected a Cisco 2811 se0/0/0 to a 128k Link
> Modem ( LL)  and fed the point to point IP address and
> using default HDLC . Se0/0/0 is UP line Protocol is UP.
>
> I can not ping the local se0/0/0 from the Console and the
> remote WAN IP. I have complete CDP information of the
> remote router.
>
> I can ping from the LAN. Any clue?

Do you have any ACL's on the serial interfaces? Have you=20
configured uRPF on any of the ACL's?
			      ^^^^^ - s/ACL's/interfaces?

Perhaps you want to paste a copy of your configuration.

Mark.

["signature.asc" (application/pgp-signature)]

_______________________________________________
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

[prev in list] [next in list] [prev in thread] [next in thread]