[prev in list] [next in list] [prev in thread] [next in thread] 

List:       cisco-nsp
Subject:    Re: [c-nsp] eBGP Multipath
From:       "David Prall" <dcp () dcptech ! com>
Date:       2006-12-31 19:51:31
Message-ID: 007001c72d15$140cba10$52e0520a () amer ! cisco ! com
[Download RAW message or body]

Kevin,
"bgp bestpath as-path multipath-relax" will allow different ASN.

David

--
http://dcp.dcptech.com


> -----Original Message-----
> From: cisco-nsp-bounces@puck.nether.net
> [mailto:cisco-nsp-bounces@puck.nether.net] On Behalf Of Kevin Cook
> Sent: Monday, December 18, 2006 9:28 AM
> To: cisco-nsp@puck.nether.net
> Subject: [c-nsp] eBGP Multipath
>
> I have 2 eBGP peers from a 6500. I am trying to load balance
> over the default route. But it is only choosing one, I set
> maximum-paths to 2 and disabled comparison of the RouterID.
>
> I just read this as well,
> http://marc.theaimsgroup.com/?l=cisco-nsp&m=100952575607893&w=2
>
> What else can I be missing?
>
> Everything seems to match in terms of metrics etc, but the
> link above says that it will not multipath via two different
> AS neighbors via this method.
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


_______________________________________________
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
[prev in list] [next in list] [prev in thread] [next in thread]