[prev in list] [next in list] [prev in thread] [next in thread]
List: cisco-nsp
Subject: rapid-pvst+ interop? WAS: Re: [c-nsp] Link aggregation/EtherChannel
From: Dave Temkin <dave () ordinaryworld ! com>
Date: 2005-07-29 2:46:49
Message-ID: Pine.LNX.4.58.0507282244490.14571 () ordinaryworld ! com
[Download RAW message or body]
David,
I will give that a shot tomorrow and see how it goes. In the
meantime, has anyone been succesful in getting Foundry's 802-1w
implementation to work with Cisco? When I enable them both, I get the
following:
Port Vlan State Role Cost Prio Type
------------------------ ---- ------------- ---- --------- ----
-----------------
4/1 860 forwarding DESG 3 32 P2P
4/1 861 forwarding DESG 3 32 P2P
NY3P-W09-CBSF-SW01> (enable) show spantree 4/1
Edge Port: -, (Configured) Disable
Link Type: -, (Configured) P2P
Port Guard: Default
Port Vlan State Role Cost Prio Type
------------------------ ---- ------------- ---- --------- ----
-----------------
4/1 860 forwarding DESG 3 32 P2P,
PEER(STP)
4/1 861 forwarding DESG 3 32 P2P
where it actually bounces back and forth between legacy and Rapid.
Anyone have any experience w/ this?
Thx,
-Dave
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic