[prev in list] [next in list] [prev in thread] [next in thread]
List: cisco-nsp
Subject: [c-nsp] ATM to ethernet VLAN local switching
From: "Robert Larsen" <cisco.pnn () rkml ! freeserve ! co ! uk>
Date: 2004-11-29 10:12:39
Message-ID: CF38C1AC325E66459222F0938F1BD04AF80CA4 () hso-ex1 ! hso ! local
[Download RAW message or body]
Hi,
I'm trying to get the ATM to ethernet VLAN local switching working properly.
What I'm trying to achieve is to connect a Cisco 828 over an SDSL line using
a VP/VC that terminates on a Cisco 7200. This VC is then connected at layer
2 on the 7200 to a VLAN, which eventually terminates on a Cisco2621.
Physical view:
828 ____SDSL ____ ATM ____ 7200 ____VLAN____ 2621
router DSLAM cloud router router
I can get the 828 to talk to the 7200 at layer 3 no problem, but what I'm
trying to do is get the 828 to see the 2621 as being directly connected at
layer 3 (i.e. the 7200 is transparent). Here is the logical (layer 3) view:
828 ____ 2621
router router
The config I'm trying to use is the following under the fastethernet
sub-interface:
connect connection-name interface pvc interface interworking
interworking-type
This is described in more detail here:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1829/products_feature_guid
e09186a00801ea88d.html#wp1110021
I'm not having any joy getting this working, so I was wondering whether any
of you have had any experience with this and can help me out?
The 7200 is a 7206VXR running IOS 12.2(25)S1.
Thanks in advance,
Rob.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic