[prev in list] [next in list] [prev in thread] [next in thread]
List: cisco-nsp
Subject: [c-nsp] CISCO-ATM-PVC-MIB question
From: Phillip Vandry <vandry () tzone ! org>
Date: 2004-11-28 22:02:27
Message-ID: 20041128220227.GA5499 () OZoNE ! TZoNE ! ORG
[Download RAW message or body]
Hi,
I'm trying to get fetch the bindings of ATM PVCs to VLANs from ATM
blades in Catalysts. The only MIB that I found that could do this is
CISCO-ATM-PVC-MIB.
http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=1.3.6.1.4.1.9.9.94.1
The problem with this MIB is that is appears to merge all ATM blades
in the Catalyst into one. There appears to be no way to tell which ATM
port a particular VPI/VCI is actually configured on. In other words,
when I snmpwalk this MIB on a Catalyst with two WS-X5158 blades, I get
merged information from both cards. (I wonder what would happen if the
same VPI/VCI was defined on both cards?)
There is an index field "capvcPort" in the MIB that is supposed to
disambiguate between multiple ports, but I can't tell what it's supposed
to stand for and it's always equal to "1" anyway.
Does anyone know how I can get around this, or perhaps a different MIB
I can use to get the same information?
Thanks
Running cat5000-sup3.5-5-13a.bin
-Phil
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic