[prev in list] [next in list] [prev in thread] [next in thread]
List: cisco-nsp
Subject: RE: crossconnection? [was: Re: [c-nsp] PA-POS-2OC3]
From: Adrian Bool <aid () logic ! org ! uk>
Date: 2004-10-27 13:30:00
Message-ID: Pine.LNX.4.61.0410271528190.15706 () 217-20-118-218 ! internetserviceteam ! com
[Download RAW message or body]
On Wed, 27 Oct 2004, Oliver Boehmer \(oboehmer\) wrote:
>> Speaking of channelized adapters, is a c7200 with two PA-MC-STM-1's
>> capable of crossconnecting specific VC12's (or VC3's, whatever..) from
>> each STM-1 coming to the router?
>
> No. the channelized STM1 (as well as other channelized adapaters) can
> only terminate the circuits, you can't turn your c7200 into a MUX..
Although I agree with this for the STM1, I think you can cross connect
DS0s on channelised E/T1s if you are on a 7200VXR chassis...
Regards,
aid
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic