[prev in list] [next in list] [prev in thread] [next in thread]
List: cisco-nsp
Subject: [nsp] 802.1x
From: Alban Dani <adani () stevens ! edu>
Date: 2004-03-30 22:31:25
Message-ID: 0HVE00MWBUKD1Z () nexus ! stevens ! edu
[Download RAW message or body]
I have recently installed ACS 3.2 and I am trying to get 802.1x going using
PEAP.
I am using Windows XP SP1, Cisco ap1100/ap1200 and catalyst 2950-48
switches. Also installed the Microsoft patch KB826942.
I have tried both the Microsoft Supplicant and the Cisco Supplicant on the
wireless side of things and they work just fine.
However to my surprise I am finding out that dot1x is no working on the
wired side of things.
I have configured the catalyst switch by adding the following commands:
aaa authentication dot1x default group radius
radius-server host x.y.z.w auth-port 1812 acct-port 1813 key ******
and under the interface : dot1x port-control auto
On the ACS side I have configured it to authenticate using Radius IETF (and
also tried CISCO IOS/PIX without much success).
The error log on the ACS says: "Bad request from NAS" and "Invalid message
authenticator in EAP request"
What am I missing?
Thanks,
Alban
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic