[prev in list] [next in list] [prev in thread] [next in thread] 

List:       cisco-nsp
Subject:    RE: [nsp] Environmental Monitor initiated shutdown on UBR7246VXR
From:       "KF" <kf () reign ! sk>
Date:       2002-01-31 15:19:38
[Download RAW message or body]

hmmm can you post how sh environment table looks like?

alex




> -----Original Message-----
> From: Tejal Shah [mailto:tejal.shah@surat.iqara.net]
> Sent: Thursday, January 31, 2002 1:52 PM
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] Environmental Monitor initiated shutdown on UBR7246VXR
> 
> 
> Hi all,
> 
> I am getting following error when i reboot my ubr7246VXR 
> CMTS with NPE-400. 
> 
> ========================================================
> 00:00:52: %SYS-3-LOGGER_FLUSHING: System pausing to ensure 
> console debugging output.
> 
> 00:00:06: %UBR7200-3-CONFIG: Exceeds 600 bandwidth points 
> for slots 0, 1, 3 & 5
> 00:00:09: %LINK-3-UPDOWN: Interface FastEthernet0/0, 
> changed state to up
> 00:00:09: %LINK-3-UPDOWN: Interface GigabitEthernet1/0, 
> changed state to up
> 00:00:09: %LINK-3-UPDOWN: Interface Cable3/0, changed state 
> to up
> 00:00:09: %LINK-3-UPDOWN: Interface Cable4/0, changed state 
> to up
> 00:00:10: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
> FastEthernet0/0, changed state to up
> 00:00:10: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
> GigabitEthernet1/0, changed state to down
> 00:00:10: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
> Cable3/0, changed state to up
> 00:00:10: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
> Cable4/0, changed state to up
> 00:00:17: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
> FastEthernet0/0, changed state to down
> 00:00:38: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
> Cable3/0, changed state to down
> 00:00:38: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
> Cable4/0, changed state to down
> 00:00:52: %UBR7200-0-TEMPHIGH:  measured at 21C/69F is too 
> high: shutdown temperature 0C/32F
> 00:00:52: %ENVM-0-SHUT: Environmental Monitor initiated 
> shutdown
> Buffered messages
> =========================================================
> 
> Pl. help me out to resolve this problem.
> 
> thanks in advance 
> Tejal Shah
> 
> 
> Go To http://www.iqara.net
> 
> 

[prev in list] [next in list] [prev in thread] [next in thread]