[prev in list] [next in list] [prev in thread] [next in thread] 

List:       caldera-users
Subject:    Re: Re[2]: caldera-users-digest V1 #435
From:       Rich McClellan <richmc () chaos ! fullerton ! edu>
Date:       1996-03-30 18:24:54
[Download RAW message or body]

Hello people,
For those of you that have tried to get boot to run level 5 and have 
experieced trouble... apparenlty RedHat left out an entry in 
/etc/inittab.  I've marked it below in kind Bob's email

Rich

On Sat, 30 Mar 1996 Robert.A.Ober@robob.robob.com wrote:

> Javier Hernandez <fjherna@ibm.net> wrote:
> > Hi All,
> > I need help.
> > My /etc/inittab file was lost and I can not boot on my Caldera
> > linux.
> > I would appreciate if anyone can send me a copy of his /etc/inittab
> > file for Caldera CND 1.0
> > thanks a lot.
> 
> Hope this helps,
> 
> #
> # inittab       This file describes how the INIT process should set up
> #               the system in a certain run-level.
> #
> # Author:       Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
> #               Modified for RHS Linux by Marc Ewing
> #
> 
> # Default runlevel. The runlevels used by RHS are:
> #   0 - halt (Do NOT set initdefault to this)
> #   1 - Single user mode
> #   2 - Multiuser, without NFS (The same as 3, if you do not have networking)
> #   3 - Full multiuser mode
> #   4 - unused
> #   5 - X11 only
> #   6 - reboot (Do NOT set initdefault to this)
> id:3:initdefault:
> 
> # System initialization.
> si::sysinit:/etc/rc.d/rc.sysinit
> 
> l0:0:wait:/etc/rc.d/rc 0
> l1:1:wait:/etc/rc.d/rc 1
> l2:2:wait:/etc/rc.d/rc 2
> l3:3:wait:/etc/rc.d/rc 3
> l4:4:wait:/etc/rc.d/rc 4  <----- HERE IT IS  There should be
> l6:6:wait:/etc/rc.d/rc 6  l5:5:wait:/etc/rc.d/rc 5 after the run
>                           level four entry.... Rich
> # Things to run in every runlevel.
> ud::once:/sbin/update
> 
> # Trap CTRL-ALT-DELETE
> ca::ctrlaltdel:/sbin/shutdown -t3 -r now
> 
> # Handle powerfail conditions.
> pf::powerwait:/etc/rc.d powerfail start
> pw::powerokwait:/etc/rc.d powerfail stop
> 
> # Run gettys in standard runlevels
> 1:1234:respawn:/sbin/getty tty1 VC linux
> 2:234:respawn:/sbin/getty tty2 VC linux
> 3:234:respawn:/sbin/getty tty3 VC linux
> 4:234:respawn:/sbin/getty tty4 VC linux
> 5:234:respawn:/sbin/getty tty5 VC linux
> 6:234:respawn:/sbin/getty tty6 VC linux
> 
> # Run xdm in runlevel 5
> # x:5:respawn:/usr/bin/X11/xdm -nodaemon
> 
> # Sample dial-in line
> # d1:2345:respawn:/sbin/uugetty ttyS0 38400
> 
> 
> ****************************************************
> 
> Good Luck:)
> 
> Have Fun!
> Robert A. Ober
> Robob@Robob.com; Contest Page at robob1.robob.com;
> Improving page: www.robob.com, FTP: ftp.robob.com & robob.robob.com
> 

[prev in list] [next in list] [prev in thread] [next in thread]