[prev in list] [next in list] [prev in thread] [next in thread]
List: busybox
Subject: =?gb18030?B?YnVzeWJveCBzeXNsb2cgbWlzc2luZyBhIGxvdCBv?= =?gb18030?B?ZiBrZXJuZWwgbWVzc2FnZXMgd2hlbiBrZ
From: "=?gb18030?B?yOe5+7Cu09DM7NLi?=" <1204539207 () qq ! com>
Date: 2020-03-09 6:23:11
Message-ID: tencent_F754D2317D6B88B3E9C8F983A3401EC30D06 () qq ! com
[Download RAW message or body]
[Attachment #2 (multipart/related)]
[Attachment #4 (multipart/alternative)]
[Attachment #6 (text/plain)]
Hi all£º
I'm using busybox-1.22.1 on an embedded system running Linux kernel 3.10.34. The \
system is openwrt and the cpu architecture is MIPS 1004Kc V2.15£¨Soc£ºMTK 7621A£©.
I check the system.log file and find it has less logs then serial port or dmesg \
outputs, below I'll list the output£º
1. logs in system.log
2020.03.03-16:29:16 info syslogd started: BusyBox v1.22.1 \
\
\
\
2020.03.03-16:29:16 notice kernel: [ 0.000000] Linux version \
3.10.34 (yanai.wang@localhost.localdomain) (gcc version 4.8.3 (OpenWrt/Linaro GCC \
4.8-2014.04 r288) ) #1 SMP Mon Mar 2 12:28 2020.03.03-16:29:16 info \
kernel: [ 0.000000] SoC Type: Mediatek MT7621 ver:1 eco:3 \
\
2020.03.03-16:29:16 info kernel: \
[ 0.000000] bootconsole [early0] enabled \
\
\
2020.03.03-16:29:16 info kernel: [ 0.000000] CPU revision \
is: 0001992f (MIPS 1004Kc) \
\
2020.03.03-16:29:16 info kernel: [ 0.000000] MIPS: machine \
is WiTown board \
\
2020.03.03-16:29:16 info kernel: [ \
0.000000] Determined physical RAM map: \
\
2020.03.03-16:29:16 \
info kernel: [ 0.000000] memory: 10000000 @ 00000000 \
(usable) \
2020.03.03-16:29:16 info \
kernel: [ 0.000000] Initrd not found or empty - disabling initrd \
\
2020.03.03-16:29:16 warn kernel: \
[ 0.000000] Zone ranges: \
\
\
2020.03.03-16:29:16 warn kernel: [ 0.000000] \
Normal [mem 0x00000000-0x0fffffff] 2020.03.04-10:17:19 \
warn kernel: [ 0.000000] Movable zone start for each node \
2020.03.04-10:17:19 info kernel: [ \
1.970000] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff pref] \
2020.03.04-10:17:19 warn kernel: [ 2.710000] FM_OUT value: \
u4FmOut = 0(0x00000000) \
2020.03.04-10:17:19 info \
kernel: [ 9.470000] xt_time: kernel timezone is -0000 \
\
2020.03.04-10:17:19 emerg syslog: ls: \
/etc/log/crashlog.*: No such file or directory \
2020.03.04-10:17:21 notice netifd: netifd start ... \
\
2020.03.04-10:17:21 warn \
kernel: [ 14.320000] raeth: HW IP/TCP/UDP checksum RX/TX offload \
enabled 2020.03.04-10:17:21 warn kernel: \
[ 14.330000] raeth: HW VLAN RX offload enabled \
2020.03.04-10:17:21 warn kernel: \
[ 14.340000] raeth: HW Scatter/Gather TX offload enabled \
\
2020.03.04-10:17:21 warn kernel: [ 14.350000] raeth: HW TCP \
segmentation offload (TSO) enabled \
2020.03.04-10:17:21 warn kernel: [ 14.360000] \
mtk_esw - hw bridge: W|LLLL \
\
2020.03.04-10:17:21 info kernel: [ 14.380000] device eth0.1 \
entered promiscuous mode 2020.03.04-10:17:21 \
info kernel: [ 14.390000] device eth0 entered promiscuous \
mode 2020.03.04-10:17:21 \
info kernel: [ 14.400000] br-lan: port 1(eth0.1) entered forwarding \
state 2020.03.04-10:17:21 info kernel: [ \
14.410000] br-lan: port 1(eth0.1) entered forwarding state
2. logs on serial port £¨too long and I just pick some of them£©
[ 0.000000] Linux version 3.10.34 (yanai.wang@localhost.localdomain) \
(gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r288) ) #1 SMP Mon Mar 2 12:28:24 \
CST 2020 [ 0.000000] SoC Type: Mediatek MT7621 ver:1 eco:3
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0001992f (MIPS 1004Kc)
[ 0.000000] MIPS: machine is WiTown board
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 10000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x0fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem \
0x00000000-0x0fffffff] #these logs below can't be seen in system.log \
reboot everytime [ 0.000000] Detected 3 available secondary \
CPU(s) [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize \
32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, \
linesize 32 bytes [ 0.000000] MIPS secondary cache 256kB, 8-way, \
linesize 32 bytes. [ 0.000000] PERCPU: Embedded 7 pages/cpu @81207000 \
s6656 r8192 d13824 u32768 [ 0.000000] Built 1 zonelists in Zone order, \
mobility grouping on. Total pages: 65024 [ 0.000000] Kernel \
command line: boot_firmware=1 console=ttyS0,57600 rootfstype=squashfs,jffs2 \
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ \
0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) \
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 \
bytes) [ 0.000000] Writing ErrCtl register=00031010
[ 0.000000] Readback ErrCtl register=00031010
[ 0.000000] Memory: 255796k/262144k available (2825k kernel code, 6348k \
reserved, 675k data, 204k init, 0k highmem) [ 0.000000] SLUB: \
HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] \
Hierarchical RCU implementation. [ 0.000000] NR_IRQS:256
[ 0.000000] gic: revision 3.0
[ 0.000000] CPU Clock: 880MHz
[ 0.000000] Calibrating delay loop... 577.53 BogoMIPS (lpj=2887680)
[ 0.050000] pid_max: default: 32768 minimum: 301
[ 0.060000] Mount-cache hash table entries: 512
[ 0.070000] CPU revision is: 0001992f (MIPS 1004Kc)
[ 0.070000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 \
bytes. [ 0.070000] Primary data cache 32kB, 4-way, PIPT, no aliases, \
linesize 32 bytes [ 0.070000] MIPS secondary cache 256kB, 8-way, \
linesize 32 bytes. [ 0.140000] Synchronize counters for CPU 1: done.
[ 0.150000] CPU revision is: 0001992f (MIPS 1004Kc)
[ 0.150000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 \
bytes. [ 0.150000] Primary data cache 32kB, 4-way, PIPT, no aliases, \
linesize 32 bytes [ 0.150000] MIPS secondary cache 256kB, 8-way, \
linesize 32 bytes. [ 0.220000] Synchronize counters for CPU 2: done.
[ 0.230000] CPU revision is: 0001992f (MIPS 1004Kc)
[ 0.230000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 \
bytes. [ 0.230000] Primary data cache 32kB, 4-way, PIPT, no aliases, \
linesize 32 bytes [ 0.230000] MIPS secondary cache 256kB, 8-way, \
linesize 32 bytes. [ 0.300000] Synchronize counters for CPU 3: done.
[ 0.310000] Brought up 4 CPUs
[ 0.310000] pinctrl core: initialized pinctrl subsystem
[ 0.320000] NET: Registered protocol family 16
[ 0.320000] witown_netlink_init init witown netlink type \
WI_NETLINK_WITOWN ! [ 0.330000] release PCIe RST: RALINK_RSTCTRL = \
7000000 [ 0.340000] ***** Xtal 40MHz *****
[ 0.340000] pull PCIe RST: RALINK_RSTCTRL = 6000000
[ 0.640000] release PCIe RST: RALINK_RSTCTRL = 7000000
[ 0.650000] Port 0 N_FTS = 1b105000
[ 0.650000] Port 1 N_FTS = 1b105000
[ 0.660000] Port 2 N_FTS = 1b105000
[ 1.790000] PCIE2 no card, disable it(RST&CLK)
[ 1.800000] -> 21007f2
[ 1.800000] PCIE0 enabled
[ 1.810000] PCIE1 enabled
[ 1.820000] bio: create slab <bio-0> at 0
[ 1.830000] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 1.840000] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 1.850000] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 1.860000] usbcore: registered new interface driver usbfs
[ 1.870000] usbcore: registered new interface driver hub
[ 1.880000] usbcore: registered new device driver usb
[ 1.900000] PCI host bridge to bus 0000:00
[ 1.900000] pci_bus 0000:00: root bus resource [mem \
0x60000000-0x6fffffff] [ 1.920000] pci_bus 0000:00: root bus resource \
[io 0x1e160000-0x1e16ffff] [ 1.930000] pci_bus 0000:00: No busn \
resource found for root bus, will use [bus 00-ff] [ 1.950000] pci \
0000:00:00.0: BAR 0: can't assign mem (size 0x80000000) [ 1.960000] pci \
0000:00:01.0: BAR 0: can't assign mem (size 0x80000000) [ 1.970000] pci \
0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] [ 1.990000] \
pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff] [ \
2.000000] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff pref] [ \
2.020000] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff] \
[ 2.030000] pci 0000:00:01.0: BAR 1: assigned [mem \
0x60310000-0x6031ffff] [ 2.040000] pci 0000:01:00.0: BAR 0: assigned \
[mem 0x60000000-0x600fffff] [ 2.060000] pci 0000:00:00.0: PCI bridge to \
[bus 01] [ 2.070000] pci 0000:00:00.0: bridge window [mem \
0x60000000-0x600fffff] [ 2.080000] pci 0000:02:00.0: BAR 0: assigned \
[mem 0x60100000-0x601fffff 64bit] [ 2.090000] pci 0000:02:00.0: BAR 6: \
assigned [mem 0x60200000-0x6020ffff pref] [ 2.110000] pci 0000:00:01.0: \
PCI bridge to [bus 02] [ 2.120000] pci 0000:00:01.0: bridge \
window [mem 0x60100000-0x601fffff] [ 2.130000] pci 0000:00:01.0: \
bridge window [mem 0x60200000-0x602fffff pref] [ 2.150000] BAR0 at \
slot 0 = 0 [ 2.150000] bus=0x0, slot = 0x0
[ 2.160000] BAR0 at slot 1 = 0
[ 2.160000] bus=0x0, slot = 0x1
[ 2.170000] bus=0x1, slot = 0x0, irq=0xff
[ 2.180000] bus=0x2, slot = 0x1, irq=0xff
[ 2.190000] Switching to clocksource MIPS
[ 2.200000] NET: Registered protocol family 2
[ 2.220000] TCP established hash table entries: 2048 (order: 2, 16384 \
bytes) [ 2.230000] TCP bind hash table entries: 2048 (order: 2, 16384 \
bytes) [ 2.240000] TCP: Hash tables configured (established 2048 bind \
2048) [ 2.260000] TCP: reno registered
[ 2.260000] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 2.270000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 2.290000] NET: Registered protocol family 1
[ 2.310000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.320000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) \
(CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 2.340000] msgmni has been \
set to 499 [ 2.350000] io scheduler noop registered
[ 2.350000] io scheduler deadline registered (default)
[ 2.370000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 2.380000] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 34) is a \
16550A [ 2.390000] console [ttyS0] enabled, bootconsole disabled
[ 2.390000] console [ttyS0] enabled, bootconsole disabled
[ 2.420000] flash manufacture id: c2, device id 20 19
[ 2.430000] MX25L25635E(c2 2019c220) (32768 Kbytes)
[ 2.440000] mtd .name = raspi, .size = 0x02000000 (32M) .erasesize = \
0x00010000 (64K) .numeraseregions = 0 [ 2.460000] Creating 9 MTD \
partitions on "raspi": [ 2.470000] 0x000000000000-0x000000030000 : \
"u-boot" [ 2.480000] 0x000000030000-0x000000040000 : "u-boot-env"
[ 2.490000] 0x000000040000-0x000000050000 : "factory"
[ 2.500000] 0x000000050000-0x000000b50000 : "firmware1"
[ 2.510000] 0x000000180222-0x000000b50000 : "rootfs"
[ 2.520000] mtd: partition "rootfs" must either start or end on erase \
block boundary or be smaller than an erase block -- forcing read-only [ \
2.550000] mtd: device 4 (rootfs) set to be root filesystem [ 2.560000] \
0x000000b50000-0x000001650000 : "firmware2" [ 2.570000] \
0x000001650000-0x000001ad0000 : "rootfs_data" [ 2.580000] \
0x000001ad0000-0x000001fd0000 : "cloud" [ 2.590000] \
0x000001fd0000-0x000001ff0000 : "Reserve" [ 2.600000] \
0x000001ff0000-0x000002000000 : "Buginfo" [ 2.620000] Ralink APSoC \
Ethernet Driver v3.2.4 (raeth) [ 2.630000] raeth: PDMA RX ring 512, PDMA \
TX ring 256. Max packet size 1536
3. my busybox syslog setting
I am full of expectation to your reply, thanks a lot.
[Attachment #7 (text/html)]
<meta http-equiv="Content-Type" content="text/html; charset=GB18030"><div><font \
color="#003366">Hi all£º</font></div><div><div><font color="#003366">I'm using \
busybox-1.22.1 on an embedded system running Linux kernel </font><span style="color: \
rgb(0, 51, 102);">3.10.34. The system is openwrt and the cpu architecture is \
</span><font color="#003366">MIPS 1004Kc V2.15£¨Soc£ºMTK \
7621A£©.</font></div></div><div><font color="#003366"><br></font></div><div><font \
color="#003366">I check the system.log file and find it has less logs then serial \
port or dmesg outputs, below I'll list the output£º</font></div><div><font \
color="#003366"><br></font></div><div><font color="#003366"><b>1. logs in \
system.log</b></font></div><div><div style="color: rgb(0, 51, \
102);">2020.03.03-16:29:16 info syslogd started: BusyBox v1.22.1 \
\
\
</div><div \
style="color: rgb(0, 51, 102);">2020.03.03-16:29:16 notice kernel: \
[ 0.000000] Linux version 3.10.34 (yanai.wang@localhost.localdomain) \
(gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r288) ) #1 SMP Mon Mar 2 \
12:28</div><div style="color: rgb(0, 51, 102);">2020.03.03-16:29:16 info \
kernel: [ 0.000000] SoC Type: Mediatek MT7621 ver:1 eco:3 \
\
</div><div style="color: rgb(0, 51, \
102);">2020.03.03-16:29:16 info kernel: [ 0.000000] \
bootconsole [early0] enabled \
\
</div><div style="color: \
rgb(0, 51, 102);">2020.03.03-16:29:16 info kernel: [ \
0.000000] CPU revision is: 0001992f (MIPS 1004Kc) \
\
</div><div style="color: rgb(0, 51, 102);">2020.03.03-16:29:16 \
info kernel: [ 0.000000] MIPS: machine is WiTown board \
\
\
</div><div style="color: rgb(0, 51, 102);">2020.03.03-16:29:16 info \
kernel: [ 0.000000] Determined physical RAM map: \
\
\
</div><div style="color: rgb(0, 51, 102);">2020.03.03-16:29:16 info \
kernel: [ 0.000000] memory: 10000000 @ 00000000 (usable) \
\
</div><div style="color: rgb(0, 51, \
102);">2020.03.03-16:29:16 info kernel: [ 0.000000] Initrd \
not found or empty - disabling initrd \
\
</div><div style="color: rgb(0, 51, 102);">2020.03.03-16:29:16 warn \
kernel: [ 0.000000] Zone ranges: \
\
\
</div><div style="color: rgb(0, 51, \
102);">2020.03.03-16:29:16 warn kernel: [ 0.000000] \
Normal [mem 0x00000000-0x0fffffff] </div><div style="color: \
rgb(0, 51, 102);">2020.03.04-10:17:19 warn kernel: [ \
0.000000] Movable zone start for each node </div><div \
style="color: rgb(0, 51, 102);">2020.03.04-10:17:19 info kernel: [ \
1.970000] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff pref] \
</div><div style="color: rgb(0, 51, 102);">2020.03.04-10:17:19 warn \
kernel: [ 2.710000] FM_OUT value: u4FmOut = 0(0x00000000) \
\
</div><div style="color: rgb(0, 51, 102);">2020.03.04-10:17:19 info \
kernel: [ 9.470000] xt_time: kernel timezone is -0000 \
\
</div><div style="color: rgb(0, 51, \
102);">2020.03.04-10:17:19 emerg syslog: ls: /etc/log/crashlog.*: No such \
file or directory </div><div style="color: rgb(0, 51, \
102);">2020.03.04-10:17:21 notice netifd: netifd start ... \
\
</div><div style="color: rgb(0, 51, \
102);">2020.03.04-10:17:21 warn kernel: [ 14.320000] raeth: \
HW IP/TCP/UDP checksum RX/TX offload enabled </div><div \
style="color: rgb(0, 51, 102);">2020.03.04-10:17:21 warn kernel: [ \
14.330000] raeth: HW VLAN RX offload enabled \
</div><div style="color: rgb(0, 51, \
102);">2020.03.04-10:17:21 warn kernel: [ 14.340000] raeth: \
HW Scatter/Gather TX offload enabled \
</div><div style="color: rgb(0, 51, \
102);">2020.03.04-10:17:21 warn kernel: [ 14.350000] raeth: \
HW TCP segmentation offload (TSO) enabled \
</div><div style="color: rgb(0, 51, \
102);">2020.03.04-10:17:21 warn kernel: [ 14.360000] mtk_esw \
- hw bridge: W|LLLL \
\
</div><div style="color: rgb(0, 51, 102);">2020.03.04-10:17:21 info \
kernel: [ 14.380000] device eth0.1 entered promiscuous mode \
</div><div style="color: rgb(0, 51, \
102);">2020.03.04-10:17:21 info kernel: [ 14.390000] device \
eth0 entered promiscuous mode \
</div><div style="color: rgb(0, 51, 102);">2020.03.04-10:17:21 info \
kernel: [ 14.400000] br-lan: port 1(eth0.1) entered forwarding \
state </div><div style="color: rgb(0, 51, \
102);">2020.03.04-10:17:21 info kernel: [ 14.410000] br-lan: \
port 1(eth0.1) entered forwarding state </div><div style="color: rgb(0, \
51, 102);"><br></div><div style="color: rgb(0, 51, 102);"><b>2. logs on serial port \
£¨too long and I just pick some of them£©</b></div><div style="color: rgb(0, 51, \
102);">[ 0.000000] Linux version 3.10.34 \
(yanai.wang@localhost.localdomain) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 \
r288) ) #1 SMP Mon Mar 2 12:28:24 CST 2020</div><div style="color: rgb(0, 51, \
102);">[ 0.000000] SoC Type: Mediatek MT7621 ver:1 eco:3</div><div \
style="color: rgb(0, 51, 102);">[ 0.000000] bootconsole [early0] \
enabled</div><div style="color: rgb(0, 51, 102);">[ 0.000000] CPU \
revision is: 0001992f (MIPS 1004Kc)</div><div style="color: rgb(0, 51, 102);">[ \
0.000000] MIPS: machine is WiTown board</div><div style="color: rgb(0, 51, \
102);">[ 0.000000] Determined physical RAM map:</div><div style="color: \
rgb(0, 51, 102);">[ 0.000000] memory: 10000000 @ 00000000 \
(usable)</div><div style="color: rgb(0, 51, 102);">[ 0.000000] Initrd \
not found or empty - disabling initrd</div><div style="color: rgb(0, 51, \
102);">[ 0.000000] Zone ranges:</div><div style="color: rgb(0, 51, \
102);">[ 0.000000] Normal [mem \
0x00000000-0x0fffffff]</div><div style="color: rgb(0, 51, 102);">[ \
0.000000] Movable zone start for each node</div><div style="color: rgb(0, 51, \
102);">[ 0.000000] Early memory node ranges</div><div style=""><font \
color="#003366">[ 0.000000] node 0: [mem \
0x00000000-0x0fffffff] </font><font color="#ff0000"><b style="">#these \
logs below can't be seen in system.log </b><b style="">reboot </b><b \
style="">everytime </b></font></div><font color="#003366"><div>[ \
0.000000] Detected 3 available secondary CPU(s)</div><div>[ 0.000000] \
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.</div><div>[ \
0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 \
bytes</div><div>[ 0.000000] MIPS secondary cache 256kB, 8-way, linesize \
32 bytes.</div><div>[ 0.000000] PERCPU: Embedded 7 pages/cpu @81207000 \
s6656 r8192 d13824 u32768</div><div>[ 0.000000] Built 1 zonelists in \
Zone order, mobility grouping on. Total pages: 65024</div><div>[ \
0.000000] Kernel command line: boot_firmware=1 console=ttyS0,57600 \
rootfstype=squashfs,jffs2</div><div>[ 0.000000] PID hash table entries: \
1024 (order: 0, 4096 bytes)</div><div>[ 0.000000] Dentry cache hash \
table entries: 32768 (order: 5, 131072 bytes)</div><div>[ 0.000000] \
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)</div><div>[ \
0.000000] Writing ErrCtl register=00031010</div><div>[ 0.000000] \
Readback ErrCtl register=00031010</div><div>[ 0.000000] Memory: \
255796k/262144k available (2825k kernel code, 6348k reserved, 675k data, 204k init, \
0k highmem)</div><div>[ 0.000000] SLUB: HWalign=64, Order=0-3, \
MinObjects=0, CPUs=4, Nodes=1</div><div>[ 0.000000] Hierarchical RCU \
implementation.</div><div>[ 0.000000] NR_IRQS:256</div><div>[ \
0.000000] gic: revision 3.0</div><div>[ 0.000000] CPU Clock: \
880MHz</div><div>[ 0.000000] Calibrating delay loop... 577.53 BogoMIPS \
(lpj=2887680)</div><div>[ 0.050000] pid_max: default: 32768 minimum: \
301</div><div>[ 0.060000] Mount-cache hash table entries: \
512</div><div>[ 0.070000] CPU revision is: 0001992f (MIPS \
1004Kc)</div><div>[ 0.070000] Primary instruction cache 32kB, VIPT, \
4-way, linesize 32 bytes.</div><div>[ 0.070000] Primary data cache 32kB, \
4-way, PIPT, no aliases, linesize 32 bytes</div><div>[ 0.070000] MIPS \
secondary cache 256kB, 8-way, linesize 32 bytes.</div><div>[ 0.140000] \
Synchronize counters for CPU 1: done.</div><div>[ 0.150000] CPU revision \
is: 0001992f (MIPS 1004Kc)</div><div>[ 0.150000] Primary instruction \
cache 32kB, VIPT, 4-way, linesize 32 bytes.</div><div>[ 0.150000] \
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes</div><div>[ \
0.150000] MIPS secondary cache 256kB, 8-way, linesize 32 \
bytes.</div><div>[ 0.220000] Synchronize counters for CPU 2: \
done.</div><div>[ 0.230000] CPU revision is: 0001992f (MIPS \
1004Kc)</div><div>[ 0.230000] Primary instruction cache 32kB, VIPT, \
4-way, linesize 32 bytes.</div><div>[ 0.230000] Primary data cache 32kB, \
4-way, PIPT, no aliases, linesize 32 bytes</div><div>[ 0.230000] MIPS \
secondary cache 256kB, 8-way, linesize 32 bytes.</div><div>[ 0.300000] \
Synchronize counters for CPU 3: done.</div><div>[ 0.310000] Brought up 4 \
CPUs</div><div>[ 0.310000] pinctrl core: initialized pinctrl \
subsystem</div><div>[ 0.320000] NET: Registered protocol family \
16</div><div>[ 0.320000] witown_netlink_init init witown netlink type \
WI_NETLINK_WITOWN !</div><div>[ 0.330000] release PCIe RST: \
RALINK_RSTCTRL = 7000000</div><div>[ 0.340000] ***** Xtal 40MHz \
*****</div><div>[ 0.340000] pull PCIe RST: RALINK_RSTCTRL = \
6000000</div><div>[ 0.640000] release PCIe RST: RALINK_RSTCTRL = \
7000000</div><div>[ 0.650000] Port 0 N_FTS = 1b105000</div><div>[ \
0.650000] Port 1 N_FTS = 1b105000</div><div>[ 0.660000] Port 2 \
N_FTS = 1b105000</div><div>[ 1.790000] PCIE2 no card, disable \
it(RST&CLK)</div><div>[ 1.800000] -> \
21007f2</div><div>[ 1.800000] PCIE0 enabled</div><div>[ \
1.810000] PCIE1 enabled</div><div>[ 1.820000] bio: create slab \
<bio-0> at 0</div><div>[ 1.830000] mt7621_gpio 1e000600.gpio: \
registering 32 gpios</div><div>[ 1.840000] mt7621_gpio 1e000600.gpio: \
registering 32 gpios</div><div>[ 1.850000] mt7621_gpio 1e000600.gpio: \
registering 32 gpios</div><div>[ 1.860000] usbcore: registered new \
interface driver usbfs</div><div>[ 1.870000] usbcore: registered new \
interface driver hub</div><div>[ 1.880000] usbcore: registered new \
device driver usb</div><div>[ 1.900000] PCI host bridge to bus \
0000:00</div><div>[ 1.900000] pci_bus 0000:00: root bus resource [mem \
0x60000000-0x6fffffff]</div><div>[ 1.920000] pci_bus 0000:00: root bus \
resource [io 0x1e160000-0x1e16ffff]</div><div>[ 1.930000] pci_bus \
0000:00: No busn resource found for root bus, will use [bus 00-ff]</div><div>[ \
1.950000] pci 0000:00:00.0: BAR 0: can't assign mem (size \
0x80000000)</div><div>[ 1.960000] pci 0000:00:01.0: BAR 0: can't assign \
mem (size 0x80000000)</div><div>[ 1.970000] pci 0000:00:00.0: BAR 8: \
assigned [mem 0x60000000-0x600fffff]</div><div>[ 1.990000] pci \
0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]</div><div>[ \
2.000000] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff \
pref]</div><div>[ 2.020000] pci 0000:00:00.0: BAR 1: assigned [mem \
0x60300000-0x6030ffff]</div><div>[ 2.030000] pci 0000:00:01.0: BAR 1: \
assigned [mem 0x60310000-0x6031ffff]</div><div>[ 2.040000] pci \
0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff]</div><div>[ \
2.060000] pci 0000:00:00.0: PCI bridge to [bus 01]</div><div>[ 2.070000] \
pci 0000:00:00.0: bridge window [mem \
0x60000000-0x600fffff]</div><div>[ 2.080000] pci 0000:02:00.0: BAR 0: \
assigned [mem 0x60100000-0x601fffff 64bit]</div><div>[ 2.090000] pci \
0000:02:00.0: BAR 6: assigned [mem 0x60200000-0x6020ffff pref]</div><div>[ \
2.110000] pci 0000:00:01.0: PCI bridge to [bus 02]</div><div>[ \
2.120000] pci 0000:00:01.0: bridge window [mem \
0x60100000-0x601fffff]</div><div>[ 2.130000] pci 0000:00:01.0: \
bridge window [mem 0x60200000-0x602fffff pref]</div><div>[ \
2.150000] BAR0 at slot 0 = 0</div><div>[ 2.150000] bus=0x0, slot = \
0x0</div><div>[ 2.160000] BAR0 at slot 1 = 0</div><div>[ \
2.160000] bus=0x0, slot = 0x1</div><div>[ 2.170000] bus=0x1, slot = 0x0, \
irq=0xff</div><div>[ 2.180000] bus=0x2, slot = 0x1, \
irq=0xff</div><div>[ 2.190000] Switching to clocksource \
MIPS</div><div>[ 2.200000] NET: Registered protocol family \
2</div><div>[ 2.220000] TCP established hash table entries: 2048 (order: \
["BB7B4216@E604792D.CFE0655E.jpg" (image/jpeg)]
_______________________________________________
busybox mailing list
busybox@busybox.net
http://lists.busybox.net/mailman/listinfo/busybox
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic