[prev in list] [next in list] [prev in thread] [next in thread]
List: busybox
Subject: [BusyBox] run-parts help text patch
From: "Eric Spakman" <E.Spakman () inter ! nl ! net>
Date: 2003-07-31 20:45:08
[Download RAW message or body]
Hello,
The following patch updates the "run-parts" help text in Config.in,
long options are supported now.
I also want to report a problem I have with "run-parts" in bb
ifupdown:
When I want to configure a bridge interface with the external brctl
utility (bridge.o kernel module loaded), with the following lines in
/etc/network/interfaces:
iface br0 inet static
address 192.168.1.254
netmask 255.255.255.0
bridge_ports all
The appropiate scripts in if-up.d, if-pre-up.d, if-post-down.d
(Debian scripts) and the busybox applet "run-parts" installed.
When I do a "ifup br0" I get the following message:
# ifup br0
ifup: failed to stat component : No such file or directory
This seems to come from the run-parts applet.
Doing the same in "real" ifupdown and a "real" run-parts program, all
works correct.
I did a lot of searching in the sources, but couldn't find the
problem. Can someone else look at it?
Regards,
Eric Spakman
--- ./busybox_old/debianutils/Config.in Sat Jul 26 11:16:00 2003
+++ ./busybox/debianutils/Config.in Thu Jul 31 09:52:17 2003
@@ -27,8 +27,8 @@
It is useful to set up a directory like cron.daily, where you need to
execute all the scripts in that directory.
- This implementation of run-parts does not accept long options, and
- some features (such as report mode) are not implemented.
+ In this implementation of run-parts some features (such as report mode)
+ are not implemented.
Unless you know that run-parts is used in some of your scripts
you can safely say N here.
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic