[prev in list] [next in list] [prev in thread] [next in thread]
List: busybox
Subject: Re: [BusyBox] Build failure
From: lbrigman () fcpa ! fujitsu ! com
Date: 2003-04-15 22:34:21
[Download RAW message or body]
gcc 3.2 on Redhat 8.0
.config attached
(See attached file: buildfail.config)
and in text if the attachment breaks.
#
# Automatically generated make config: don't edit
#
HAVE_DOT_CONFIG=y
#
# General Configuration
#
# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set
CONFIG_FEATURE_BUFFERS_GO_ON_STACK=y
# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
# CONFIG_FEATURE_VERBOSE_USAGE is not set
# CONFIG_FEATURE_INSTALLER is not set
# CONFIG_LOCALE_SUPPORT is not set
# CONFIG_FEATURE_DEVFS is not set
# CONFIG_FEATURE_DEVPTS is not set
# CONFIG_FEATURE_CLEAN_UP is not set
# CONFIG_FEATURE_SUID is not set
#
# Build Options
#
DOSTATIC=y
# DOLFS is not set
# USING_CROSS_COMPILER is not set
EXTRA_CFLAGS_OPTIONS=""
#
# Installation Options
#
# CONFIG_INSTALL_NO_USR is not set
PREFIX="./_install"
#
# Archival Utilities
#
# CONFIG_AR is not set
# CONFIG_BUNZIP2 is not set
# CONFIG_CPIO is not set
# CONFIG_DPKG is not set
# CONFIG_DPKG_DEB is not set
CONFIG_GUNZIP=y
# CONFIG_FEATURE_GUNZIP_UNCOMPRESS is not set
CONFIG_GZIP=y
# CONFIG_RPM2CPIO is not set
# CONFIG_RPM is not set
CONFIG_TAR=y
CONFIG_FEATURE_TAR_CREATE=y
# CONFIG_FEATURE_TAR_BZIP2 is not set
# CONFIG_FEATURE_TAR_EXCLUDE is not set
CONFIG_FEATURE_TAR_GZIP=y
# CONFIG_FEATURE_TAR_OLDGNU_COMPATABILITY is not set
CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
# CONFIG_FEATURE_UNARCHIVE_TAPE is not set
# CONFIG_UNCOMPRESS is not set
# CONFIG_UNZIP is not set
#
# Coreutils
#
CONFIG_BASENAME=y
# CONFIG_CAL is not set
CONFIG_CAT=y
# CONFIG_CHGRP is not set
CONFIG_CHMOD=y
CONFIG_CHOWN=y
CONFIG_CHROOT=y
# CONFIG_CMP is not set
CONFIG_CP=y
CONFIG_CUT=y
CONFIG_DATE=y
CONFIG_FEATURE_DATE_ISOFMT=y
# CONFIG_DD is not set
CONFIG_DF=y
# CONFIG_DIRNAME is not set
# CONFIG_DOS2UNIX is not set
CONFIG_DU=y
CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K=y
CONFIG_ECHO=y
CONFIG_FEATURE_FANCY_ECHO=y
CONFIG_ENV=y
# CONFIG_EXPR is not set
CONFIG_FALSE=y
CONFIG_HEAD=y
# CONFIG_FEATURE_FANCY_HEAD is not set
# CONFIG_HOSTID is not set
CONFIG_ID=y
# CONFIG_LENGTH is not set
CONFIG_LN=y
# CONFIG_LOGNAME is not set
CONFIG_LS=y
CONFIG_FEATURE_LS_FILETYPES=y
CONFIG_FEATURE_LS_FOLLOWLINKS=y
# CONFIG_FEATURE_LS_RECURSIVE is not set
CONFIG_FEATURE_LS_SORTFILES=y
CONFIG_FEATURE_LS_TIMESTAMPS=y
CONFIG_FEATURE_LS_USERNAME=y
CONFIG_FEATURE_LS_COLOR=y
# CONFIG_MD5SUM is not set
CONFIG_MKDIR=y
# CONFIG_MKFIFO is not set
CONFIG_MKNOD=y
CONFIG_MV=y
# CONFIG_OD is not set
# CONFIG_PRINTF is not set
CONFIG_PWD=y
# CONFIG_REALPATH is not set
CONFIG_RM=y
CONFIG_RMDIR=y
# CONFIG_SHA1SUM is not set
CONFIG_SLEEP=y
# CONFIG_FEATURE_FANCY_SLEEP is not set
CONFIG_SORT=y
# CONFIG_FEATURE_SORT_REVERSE is not set
# CONFIG_FEATURE_SORT_UNIQUE is not set
CONFIG_STTY=y
CONFIG_SYNC=y
CONFIG_TAIL=y
# CONFIG_FEATURE_FANCY_TAIL is not set
# CONFIG_TEE is not set
CONFIG_TEST=y
#
# test (forced enabled for use with shell)
#
CONFIG_TOUCH=y
# CONFIG_TR is not set
CONFIG_TRUE=y
CONFIG_TTY=y
CONFIG_UNAME=y
CONFIG_UNIQ=y
# CONFIG_USLEEP is not set
# CONFIG_UUDECODE is not set
# CONFIG_UUENCODE is not set
# CONFIG_WATCH is not set
# CONFIG_WC is not set
# CONFIG_WHO is not set
CONFIG_WHOAMI=y
CONFIG_YES=y
#
# Common options for cp and mv
#
# CONFIG_FEATURE_PRESERVE_HARDLINKS is not set
#
# Common options for ls and more
#
CONFIG_FEATURE_AUTOWIDTH=y
#
# Common options for df, du, ls
#
CONFIG_FEATURE_HUMAN_READABLE=y
#
# Console Utilities
#
# CONFIG_CHVT is not set
CONFIG_CLEAR=y
# CONFIG_DEALLOCVT is not set
# CONFIG_DUMPKMAP is not set
# CONFIG_LOADACM is not set
# CONFIG_LOADFONT is not set
# CONFIG_LOADKMAP is not set
CONFIG_OPENVT=y
CONFIG_RESET=y
# CONFIG_SETKEYCODES is not set
#
# Debian Utilities
#
# CONFIG_MKTEMP is not set
# CONFIG_READLINK is not set
# CONFIG_RUN_PARTS is not set
CONFIG_WHICH=y
#
# Editors
#
# CONFIG_AWK is not set
CONFIG_SED=y
# CONFIG_FEATURE_SED_EMBEDED_NEWLINE is not set
CONFIG_VI=y
CONFIG_FEATURE_VI_COLON=y
CONFIG_FEATURE_VI_YANKMARK=y
CONFIG_FEATURE_VI_SEARCH=y
CONFIG_FEATURE_VI_USE_SIGNALS=y
CONFIG_FEATURE_VI_DOT_CMD=y
CONFIG_FEATURE_VI_READONLY=y
CONFIG_FEATURE_VI_SETOPTS=y
CONFIG_FEATURE_VI_SET=y
CONFIG_FEATURE_VI_WIN_RESIZE=y
CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
#
# Finding Utilities
#
CONFIG_FIND=y
# CONFIG_FEATURE_FIND_MTIME is not set
# CONFIG_FEATURE_FIND_PERM is not set
CONFIG_FEATURE_FIND_TYPE=y
CONFIG_FEATURE_FIND_XDEV=y
CONFIG_FEATURE_FIND_NEWER=y
CONFIG_FEATURE_FIND_INUM=y
CONFIG_GREP=y
# CONFIG_FEATURE_GREP_EGREP_ALIAS is not set
# CONFIG_FEATURE_GREP_CONTEXT is not set
# CONFIG_XARGS is not set
#
# Init Utilities
#
CONFIG_INIT=y
CONFIG_FEATURE_USE_INITTAB=y
# CONFIG_FEATURE_INITRD is not set
# CONFIG_FEATURE_INIT_COREDUMPS is not set
# CONFIG_FEATURE_EXTRA_QUIET is not set
CONFIG_HALT=y
CONFIG_POWEROFF=y
CONFIG_REBOOT=y
# CONFIG_START_STOP_DAEMON is not set
CONFIG_MESG=y
#
# Login/Password Management Utilities
#
# CONFIG_USE_BB_PWD_GRP is not set
# CONFIG_ADDGROUP is not set
# CONFIG_DELGROUP is not set
# CONFIG_ADDUSER is not set
# CONFIG_DELUSER is not set
# CONFIG_GETTY is not set
# CONFIG_LOGIN is not set
# CONFIG_PASSWD is not set
# CONFIG_SU is not set
# CONFIG_SULOGIN is not set
# CONFIG_VLOCK is not set
#
# Miscellaneous Utilities
#
# CONFIG_ADJTIMEX is not set
# CONFIG_CROND is not set
# CONFIG_CRONTAB is not set
# CONFIG_DC is not set
# CONFIG_DUTMP is not set
# CONFIG_MAKEDEVS is not set
# CONFIG_MT is not set
# CONFIG_STRINGS is not set
# CONFIG_TIME is not set
# CONFIG_UPDATE is not set
# CONFIG_WATCHDOG is not set
#
# Linux Module Utilities
#
CONFIG_INSMOD=y
# CONFIG_FEATURE_OLD_MODULE_INTERFACE is not set
CONFIG_FEATURE_NEW_MODULE_INTERFACE=y
#
# Support new (post 2.1) Linux kernels (Forced enabled)
#
# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
CONFIG_LSMOD=y
CONFIG_FEATURE_QUERY_MODULE_INTERFACE=y
CONFIG_MODPROBE=y
CONFIG_RMMOD=y
CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
#
# Networking Utilities
#
# CONFIG_FEATURE_IPV6 is not set
# CONFIG_ARPING is not set
# CONFIG_FTPGET is not set
# CONFIG_FTPPUT is not set
CONFIG_HOSTNAME=y
# CONFIG_HTTPD is not set
CONFIG_IFCONFIG=y
CONFIG_FEATURE_IFCONFIG_STATUS=y
# CONFIG_FEATURE_IFCONFIG_SLIP is not set
# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
CONFIG_FEATURE_IFCONFIG_HW=y
# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
# CONFIG_IFUPDOWN is not set
# CONFIG_INETD is not set
# CONFIG_IP is not set
# CONFIG_IPCALC is not set
# CONFIG_IPADDR is not set
# CONFIG_IPLINK is not set
# CONFIG_IPROUTE is not set
# CONFIG_IPTUNNEL is not set
# CONFIG_NAMEIF is not set
# CONFIG_NC is not set
# CONFIG_NETSTAT is not set
CONFIG_NSLOOKUP=y
CONFIG_PING=y
CONFIG_FEATURE_FANCY_PING=y
CONFIG_ROUTE=y
# CONFIG_TELNET is not set
CONFIG_TELNETD=y
# CONFIG_FEATURE_TELNETD_INETD is not set
CONFIG_TFTP=y
CONFIG_FEATURE_TFTP_GET=y
CONFIG_FEATURE_TFTP_PUT=y
# CONFIG_FEATURE_TFTP_BLOCKSIZE is not set
CONFIG_FEATURE_TFTP_DEBUG=y
# CONFIG_TRACEROUTE is not set
# CONFIG_VCONFIG is not set
CONFIG_WGET=y
CONFIG_FEATURE_WGET_STATUSBAR=y
CONFIG_FEATURE_WGET_AUTHENTICATION=y
#
# udhcp Server/Client
#
# CONFIG_UDHCPD is not set
CONFIG_UDHCPC=y
# CONFIG_FEATURE_UDHCP_SYSLOG is not set
CONFIG_FEATURE_UDHCP_DEBUG=y
#
# Process Utilities
#
CONFIG_FREE=y
CONFIG_KILL=y
CONFIG_KILLALL=y
# CONFIG_PIDOF is not set
CONFIG_PS=y
# CONFIG_RENICE is not set
# CONFIG_TOP is not set
CONFIG_UPTIME=y
#
# Another Bourne-like Shell
#
CONFIG_FEATURE_SH_IS_ASH=y
# CONFIG_FEATURE_SH_IS_HUSH is not set
# CONFIG_FEATURE_SH_IS_LASH is not set
# CONFIG_FEATURE_SH_IS_MSH is not set
# CONFIG_FEATURE_SH_IS_NONE is not set
CONFIG_ASH=y
#
# ash (forced enabled as default shell)
#
#
# Ash Shell Options
#
CONFIG_ASH_JOB_CONTROL=y
CONFIG_ASH_ALIAS=y
CONFIG_ASH_MATH_SUPPORT=y
# CONFIG_ASH_GETOPTS is not set
# CONFIG_ASH_CMDCMD is not set
# CONFIG_ASH_MAIL is not set
CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
# CONFIG_HUSH is not set
# CONFIG_LASH is not set
# CONFIG_MSH is not set
#
# Bourne Shell Options
#
CONFIG_FEATURE_COMMAND_EDITING=y
# CONFIG_FEATURE_COMMAND_SAVEHISTORY is not set
CONFIG_FEATURE_COMMAND_TAB_COMPLETION=y
# CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION is not set
CONFIG_FEATURE_COMMAND_HISTORY=15
# CONFIG_FEATURE_SH_STANDALONE_SHELL is not set
# CONFIG_FEATURE_SH_APPLETS_ALWAYS_WIN is not set
# CONFIG_FEATURE_SH_FANCY_PROMPT is not set
# CONFIG_FEATURE_SH_EXTRA_QUIET is not set
#
# System Logging Utilities
#
CONFIG_SYSLOGD=y
CONFIG_FEATURE_REMOTE_LOG=y
CONFIG_FEATURE_IPC_SYSLOG=y
CONFIG_LOGREAD=y
CONFIG_KLOGD=y
CONFIG_LOGGER=y
#
# Linux System Utilities
#
CONFIG_DMESG=y
# CONFIG_FBSET is not set
# CONFIG_FDFLUSH is not set
# CONFIG_FDISK is not set
# CONFIG_FREERAMDISK is not set
# CONFIG_FSCK_MINIX is not set
# CONFIG_MKFS_MINIX is not set
# CONFIG_GETOPT is not set
# CONFIG_HEXDUMP is not set
# CONFIG_HWCLOCK is not set
# CONFIG_LOSETUP is not set
# CONFIG_MKSWAP is not set
CONFIG_MORE=y
CONFIG_FEATURE_USE_TERMIOS=y
#
# Common options for ls and more
#
CONFIG_PIVOT_ROOT=y
CONFIG_RDATE=y
# CONFIG_SWAPONOFF is not set
CONFIG_MOUNT=y
# CONFIG_NFSMOUNT is not set
CONFIG_UMOUNT=y
# CONFIG_FEATURE_MOUNT_FORCE is not set
#
# Common options for mount/umount
#
# CONFIG_FEATURE_MOUNT_LOOP is not set
CONFIG_FEATURE_MTAB_SUPPORT=y
CONFIG_FEATURE_MTAB_FILENAME="/etc/mtab"
#
# Debugging Options
#
# DODEBUG is not set
----
Larry Brigman
Fujitsu Computer Products of America
503.693.2051 lbrigman@fcpa.fujitsu.com
Coins 87-7935-2051
\
Erik Andersen \
<andersen@codepoet. To: lbrigman@fcpa.fujitsu.com \
org> cc: busybox@busybox.net \
Subject: Re: [BusyBox] Build failure \
04/15/03 02:11 PM \
Please respond to \
andersen \
\
\
On Tue Apr 15, 2003 at 08:51:22AM -0700, lbrigman@fcpa.fujitsu.com wrote:
> The lastest unstable snapshot (from 20030415) does not build the
> libbb/change_identity.c
> Lines 45,49,51
> dereferencing pointer to incomplete type
It compiles perfectly for me. Can you provide your .config,
and the gcc version you are using?
-Erik
--
Erik B. Andersen http://codepoet-consulting.com/
--This message was written using 73% post-consumer electrons--
["buildfail.config" (application/octet-stream)]
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic