[prev in list] [next in list] [prev in thread] [next in thread]
List: buildroot
Subject: [Buildroot] [PATCH] rpi-firmware: Fixup config.txt
From: Maxime Hadjinlian <maxime.hadjinlian () gmail ! com>
Date: 2013-04-30 9:08:08
Message-ID: 1367312888-22216-1-git-send-email-maxime.hadjinlian () gmail ! com
[Download RAW message or body]
The default name of the kernel binary for the RaspberryPi is kernel.img, it's
only a zImage kernel renamed.
Since Buildroot will build a zImage, the default config should use the zImage
name instead of forcing the user to rename a file.
This patch also remove the cmdline argument rootfstype. There is no point
forcing the user to use ext4 for its root partition.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
---
package/rpi-firmware/config.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/package/rpi-firmware/config.txt b/package/rpi-firmware/config.txt
index 2cabd68..a818762 100644
--- a/package/rpi-firmware/config.txt
+++ b/package/rpi-firmware/config.txt
@@ -6,9 +6,10 @@
arm_freq=700
core_freq=250
+kernel=zImage
disable_overscan=1
gpu_mem_256=100
gpu_mem_512=100
sdram_freq=400
over_voltage=0
-cmdline="dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 \
dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait" \
+cmdline="dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 \
dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootwait"
--
1.7.10.4
_______________________________________________
buildroot mailing list
buildroot@busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic