[prev in list] [next in list] [prev in thread] [next in thread]
List: buildroot
Subject: [Buildroot] Problem booting 2.6.20.4 on AT91RM9200EK
From: ulf () atmel ! com (Ulf Samuelsson)
Date: 2007-04-19 4:41:06
Message-ID: 003e01c7823d$954a7810$01c4af0a () Glamdring
[Download RAW message or body]
> Ulf Samuelsson wrote:
>> Trying out linux-2.6.20.4 on an AT91RM9200EK
>> built by a buildroot downloaded 20070405 (with fixes).
>>
>>
>> Using gcc-3.4.6/binutils 2.16.1 initially built by buildroot
>> but now used as an external toolchain.
>>
>>
>> Getting the following error messages.
>>
>> /sbin/ init: can't load library 'libgcc_s.so.1'
>> Kernel panic - not syncing: Attempted to kill init!
>>
>>
>> Any clues?
>>
>> Found "toolchain_build_arm_small/gcc-3.4.6-final/gcc/libgcc_s.so.1"
>> which I guess is what I am looking for.
>> What is the approriate way to get that into the root file system?
>>
>>
>> [...]
>
> I've had this problem in the past when I have defined
> "BR2_GCC_SHARED_LIBGCC" via "Build/install a shared libgcc" in your
> Toolchain Options. Unless you otherwise need it, you might try disabling
> and rebuilding.
>
> Jeremy
>
Apparently this problem occurs if you remove the "root" directory"
without rebuilding the toolchain.
I
Probably a ton of errors which results from this
Best Regards
Ulf Samuelsson
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic