[prev in list] [next in list] [prev in thread] [next in thread]
List: bonding-devel
Subject: Re: [Bonding-devel] Double broadcasts?
From: Mark Huth <mhuth () mvista ! com>
Date: 2004-06-22 17:26:26
Message-ID: 40D86BC2.7080602 () mvista ! com
[Download RAW message or body]
Quite probably it is expected behavior. Bonding always "listens" on all
interfaces. Assuming the broadcasts are going to a MAC group address or
the broadcast address, then it would be propagated to all interfaces by
the switch (possibly depending on the switch configuration). Also, if
you have a hub instead of a switch, then you'll always see double
packets received.
The bonding link management is vulnerable to a lot of anomolies. But
short of instituting a link monitoring protocol one all of the peers, it
isn't really possible to fix.
Mark Huth
Rob Kramer wrote:
>Hi,
>
>My server seems to receive broadcast datagrams twice on its bonding interface
>(active-backup mode), i.e. a broadcast UDP packet on the network results in
>two distinct socket events. Is this expected behaviour, or is my setup or my
>software wrong?
>
>Cheers,
>
> Rob
>
>
>
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
Bonding-devel mailing list
Bonding-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bonding-devel
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic