[prev in list] [next in list] [prev in thread] [next in thread] 

List:       blackicedefender-technical
Subject:    Re: [bidworks] Re: W2K beta drivers not working...? Help!
From:       pcguy pcguy
Date:       2000-04-30 0:40:46
[Download RAW message or body]

At 09:29 AM 4/29/2000 , Shawn Scott wrote:
>Your not alone in this W2K problem. I have been having the same
>problems since day one. If I upgrade to anything later then 1.9.6 I
>get teh filter failed message as well.
>
>I'm still trying to figure out how a newer product can have a smaller
>version number.

1.9.25 is a newer version than 1.9.6 since the last number 25 is 
greater than 6.


>--- In bidworks@egroups.com, "Jason Argos" realityengine wrote:
> > Yes, I've followed the instructions explicitely. I'm using W2k 2195
> > retail, and attempting to use 1.9.25 of BID. I don't understand why
> > 1.9.6 used to work with the earlier beta drivers but the newer one
> > just won't work on my system now. Can anyone determine anything
>from
> > the log I posted below? I assume that the errors listed there have
> > something to do with it. Thanks again all.
> >
> >
> > --- In bidworks@egroups.com, "Jeff99" jeffffej  wrote:
> > >  You have build 2195 of Windows 2000, right?
> > > And you put the DLL in the "system32" directory and the SYS in
>the
> > > "system32\drivers" directory after stopping blackice, right?
> > > A friend of mine accidentally skipped a couple of the steps and
>had
> > a
> > > very similar problem.  Good luck!
> > > JJ
> > >
> > > "jason argos" realityengin-@subdimension.com wrote:
> > > original article:http://www.egroups.com/group/bidworks/?start=1462
> > > > Ok, all. I've done a clean install, followed the beta
>instructions
> > > > explicitely (again) and BID is still only showing a 'Filter
> > Failed'
> > > > message when it loads. The tasktray icon doesn't even blink
>red,
> > only
> > > a
> > > > 'filter failed' warning in the attack list. I've gone through
>the
> > logs
> > > > and the only thing I can see that seems relevant is the
>following
> > > > enty(s):
> > > >
> > > > <snip>
> > > > IN::Fri, 31 Mar 2000 01:01:59: LocalHostInfo.gethostipaddr: The
> > system
> > > > cannot find the file specified.
> > > >
> > > >  (2) returned by RegOpenKeyEx(adapter) on
> > System\CurrentControlSet\Se
> > > rv
> > > > ices\NdisWanIp\Parameters\Tcpip
> > > > IN::Fri, 31 Mar 2000 01:02:00: LocalHostInfo.gethostipaddr: The
> > system
> > > > cannot find the file specified.
> > > >
> > > >  (2) returned by RegOpenKeyEx(adapter) on
> > System\CurrentControlSet\Se
> > > rv
> > > > ices\NdisWanIp\Parameters\Tcpip
> > > > Fri, 31 Mar 2000 01:02:00: BT_DnsResolver.run() threadstart 0
> > > > Fri, 31 Mar 2000 01:02:00: BT_NbtResolver.run() threadstart 1
> > > > IN::Fri, 31 Mar 2000 01:02:00: BT_DnsResolver.run()...
> > > > IN::Fri, 31 Mar 2000 01:02:00: BT_NbtResolver.run()...
> > > > IN::Fri, 31 Mar 2000 01:02:00: LocalHostInfo.gethostipaddr: The
> > system
> > > > cannot find the file specified.
> > > >
> > > >  (2) returned by RegOpenKeyEx(adapter) on
> > System\CurrentControlSet\Se
> > > rv
> > > > ices\NdisWanIp\Parameters\Tcpip
> > > > Fri, 31 Mar 2000 01:02:00: Fri, 31 Mar 2000 01:02:00:
> > > > BIMiddleware.run() threadstart 2
> > > > ---BI Plugin Master Control System Started---
> > > > Fri, 31 Mar 2000 01:02:00: BISDK.load_libraries("plugins/*")
> > > > IN::Fri, 31 Mar 2000 01:02:00: LocalHostInfo.gethostipaddr: The
> > system
> > > > cannot find the file specified.
> > > >
> > > >  (2) returned by RegOpenKeyEx(adapter) on
> > System\CurrentControlSet\Se
> > > rv
> > > > ices\NdisWanIp\Parameters\Tcpip
> > > > EX::Fri, 31 Mar 2000 01:02:00: BIPacketLog.setParameter
> > (maxseconds,86
> > > 40
> > > > 0) unknown parameter
> > > >
> > > >
> > > > Does this mean anything to anyone here? I cant make out much
>here
> > > other
> > > > than something (IP address?) isn't being detected. Any
>information
> > > > greatly appreciated.
> > > >
> > > > PS: I am getting the same results with the 3.28 and the 3.9 beta
> > > > drivers. Thanks in advance.
> > > >
> > > >
> > > >
>
>
>------------------------------------------------------------------------
>Accurate impartial advice on everything from laptops to table saws.
>http://click.egroups.com/1/3020/4/_/168401/_/957018560/
>------------------------------------------------------------------------
>
>To Post a message, send it to:   bidworks
>To Unsubscribe, send a blank message to: bidworks-unsubscribe

[prev in list] [next in list] [prev in thread] [next in thread]