[prev in list] [next in list] [prev in thread] [next in thread]
List: bird-users
Subject: Re: Log and Filter Question
From: Ondrej Zajicek <santiago () crfreenet ! org>
Date: 2021-07-13 11:40:36
Message-ID: YO17tC+8fajYHncL () feanor ! crfreenet ! org
[Download RAW message or body]
On Fri, Jul 09, 2021 at 08:11:56PM +0200, pr0j3ctx wrote:
> Hi.
>
>
> >> 1. I've seen that you can use "debug channels all;" can turn on the
> >> channel log. Unfortunately I couldn't do that. Is this right?
> > This should work in 2.0.8, would not work if you have older version.
> I am on 2.0.7. I will try again after an update.
> >> 2. I built various filters. I can also see my print message in the log.
> >> Can I also have this message displayed when I call up "birdc show route
> >> filtered". So which filter took effect? Or do I need another command for
> >> this?
> > No, the command 'birdc show route filtered' do not run filters, just
> > show saved filtered routes.
> >
> Can I see my 'print' output anywhere else on the route? With another
> command?
No, it is not saved.
I thought that it could be handled by using custom route attribute (so
you could assign the failure description there), but seems that they are
not supported for string type.
--
Elen sila lumenn' omentielvo
Ondrej 'Santiago' Zajicek (email: santiago@crfreenet.org)
OpenPGP encrypted e-mails preferred (KeyID 0x11DEADC3, wwwkeys.pgp.net)
"To err is human -- to blame it on a computer is even more so."
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic