[prev in list] [next in list] [prev in thread] [next in thread] 

List:       batik-users
Subject:    Re: Antwort: Re: Problem with alignment when printing, UPDATE to
From:       Thomas DeWeese <Thomas.DeWeese () Kodak ! com>
Date:       2004-12-15 11:21:56
Message-ID: 41C01E54.7020503 () Kodak ! com
[Download RAW message or body]

Bjoern.Stenersen@si-software.de wrote:

> 
> Thomas DeWeese <Thomas.DeWeese@Kodak.com> schrieb am 14.12.2004 14:06:58:
> 
>  > Bjoern.Stenersen@si-software.de wrote:
>  >
>  > > Sorry, I mean it is important for me that the square starts 1cm 
>  > > from the left edge and 1 cm from the top!
>  >
>  >     Look at the allowed values for the "preserveAspectRatio" attribute.
>  > In particular 'xMinYMin meet'.
> 
> Do You mean to change the document itself or is there a parameter in the 
> PrintTranscoder?

    This would need to be changed in the document (although the change
to the document can be made after the 'source' document has been
loaded.

> I changed my SVG to this:
>   <svg width="200" height="200" preserveAspectRatio="xMinYMin meet" 
>        xml:space="preserve" viewbox="0 0 600 600" 
>        xmlns="http://www.w3.org/2000/svg">
> 
> and changed the preserveAspectRatio-Parameter several times, nothing 
> happened. To be sure my programm has no bug I also tried to print with 
> squiggle, same result, the output does not change, even though I changed 
> the preserveAspectRatio-Parameter.

    Well, then something isn't working right ;)
    Are you using the AOI hint?  Rightly or wrongly (probably
wrongly) this bypasses the viewBox handling.

>  > > Bjoern.Stenersen@si-software.de schrieb am 14.12.2004 09:45:41:
>  > >
>  > >  >
>  > >  > Hi,
>  > >  > I am trying to print this little SVG:
>  > >  >
>  > >  > <?xml version="1.0" encoding="UTF-8"?>
>  > >  > <!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 20010904//EN"  "http://www.w3.
>  > >  > org/TR/2001/REC-SVG-20010904/DTD/svg10.dtd">
>  > >  > <svg width="200" height="200" xmlns="http://www.w3.org/2000/svg">
>  > >  >   <g>
>  > >  >     <rect x="0" y="0" width="200" height="200" fill="darkblue"/>
>  > >  >   </g>
>  > >  > </svg>
>  > >  >
>  > >  > When I am telling the printdialog to use 1cm margin each side the
>  > >  > svg gets scaled (aspect ratio is preserved) to fit to the page,
>  > >  > which is ok. What bothers me is that the square also gets centered
>  > >  > in the vertical axis. It is important for me that when i use 1 cm
>  > >  > margin the square starts 1cm from the left edge and 1 cm from the
>  > >  > right
>  > >
>  > > *** UPDATE ***
>  > >
>  > >  > and not 1 cm from the left and "somewhere" from the top. Does
>  > >  > anybody have a guess how to change the alignment from center to
>  > > northwest?
>  > >  >
>  > >  > Thanks, Björn
>  >
>  >
>  >
>  > ---------------------------------------------------------------------
>  > To unsubscribe, e-mail: batik-users-unsubscribe@xml.apache.org
>  > For additional commands, e-mail: batik-users-help@xml.apache.org
>  >



---------------------------------------------------------------------
To unsubscribe, e-mail: batik-users-unsubscribe@xml.apache.org
For additional commands, e-mail: batik-users-help@xml.apache.org


[prev in list] [next in list] [prev in thread] [next in thread]