[prev in list] [next in list] [prev in thread] [next in thread]
List: bacula-users
Subject: Re: [Bacula-users] Bacula director error messages
From: Martin Simmons <martin () lispworks ! com>
Date: 2019-05-23 15:28:43
Message-ID: 201905231528.x4NFShLv009159 () higson ! cam ! lispworks ! com
[Download RAW message or body]
I've managed to repeat it now.
Please try the patch wait-without-sd-client-heartbeat.patch attached to
<https://bugs.bacula.org/view.php?id=2476>.
__Martin
>>>>> On Fri, 10 May 2019 21:51:23 +0200, Andras Horvai said:
>
> Hi Martin,
>
> thanks for the deep explanation! Sure I can test it... I am not sure how
> fast I can give feedback... depends how fast the LTO tapes fill.
>
> Thanks again,
>
> Andras
>
> On Fri, May 10, 2019 at 5:57 PM Martin Simmons <martin@lispworks.com> wrote:
>
> > You can get "Connection reset by peer" on Linux even within a single
> > process
> > as follows:
> >
> > 0. Suppose A and B are two file descriptors connected by a socket.
> >
> > 1. Write a byte to A.
> >
> > 2. Close B.
> >
> > 3. Read a byte from A. This fails with "Connection reset by peer" rather
> > than
> > getting EOF. You do get EOF if you omit step 1.
> >
> > There might be other related situations.
> >
> >
> > I'm not 100% sure how this happens in Bacula, but it might be something
> > like:
> >
> > 0. The reading SD and writing SD threads are connected by a socket.
> >
> > 1. The writing SD wants a new tape, so it calls wait_for_sysop.
> >
> > 1a. This calls jcr->file_bsock->signal(BNET_HEARTBEAT), which writes a
> > byte to
> > the socket.
> >
> > 1b. The new tape is loaded and wait_for_sysop returns.
> >
> > 1c. The writing SD continues its loop in do_append_data, reading from the
> > socket.
> >
> > 2. The reading SD reaches the end of the old data and closes the socket.
> >
> > 3. The writing SD is still reading in do_append_data and so gets
> > "Connection
> > reset by peer".
> >
> > As you say, waiting for a new Volume is not unusual, but the difference is
> > that I think nothing wil read the BNET_HEARTBEAT in a Copy job. For a
> > Backup
> > job, the FD (acting as the reading SD above) doesn't close the socket
> > until it
> > has synchronized with the writing SD.
> >
> > I have no way to reproduce this, but the theory could be tested if Andras
> > can
> > run a patched SD with wait_for_sysop changed to skip the heartbeat when
> > running a Copy job.
> >
> > __Martin
> >
> >
> >
> > >>>>> On Fri, 10 May 2019 14:55:53 +0200, Kern Sibbald said:
> > >
> > > Hello Martin,
> > >
> > > This is an interesting reflection. Do you think it is a timeout, or an
> > > out and out bug where Bacula gets confused with additional
> > > communications? A bug would be a bit hard to understand, because the
> > > SD often waits for a Volume to be mounted -- of course, there can
> > > certainly be bug for a copy job where two separate Volumes are involved.
> > >
> > > Do you have any way to easily reproduce this?
> > >
> > > Best regards,
> > > Kern
> > >
> > > On 5/10/19 1:25 PM, Martin Simmons wrote:
> > > > I'm pretty sure the "Connection reset by peer" error is a Bacula bug,
> > > > triggered when a Copy job waits in the middle for a new tape to write.
> > > >
> > > > This is causing the Copying Error status.
> > > >
> > > > __Martin
> > > >
> > > >
> > > >
> > > >>>>>> On Fri, 10 May 2019 00:19:54 +0200, Andras Horvai said:
> > > >> hi,
> > > >>
> > > >> anybody, any idea regarding this error? Why the termination status of
> > the
> > > >> previous job was: *** Copying Error *** ?
> > > >>
> > > >> Thanks,
> > > >>
> > > >> Andras
> > > >>
> > > >> On Wed, May 8, 2019 at 4:11 PM Andras Horvai <andras.horvai@gmail.com
> > >
> > > >> wrote:
> > > >>
> > > >>> you got the point, here it is another error message:
> > > >>>
> > > >>> 06-May 12:01 backup2-dir JobId 1038: Using Device "LTO-6" to write.
> > > >>> 06-May 12:07 backup2-sd JobId 1038: [SI0202] End of Volume
> > "WORMW-1181" at
> > > >>> 1424:28456 on device "LTO-6" (/dev/nst0). Write of 64512 bytes got
> > -1.
> > > >>> 06-May 12:07 backup2-sd JobId 1038: Re-read of last block succeeded.
> > > >>> 06-May 12:07 backup2-sd JobId 1038: End of medium on Volume
> > "WORMW-1181"
> > > >>> Bytes=2,820,363,420,672 Blocks=43,718,430 at 06-May-2019 12:07.
> > > >>> 06-May 12:08 backup2-dir JobId 1038: Created new Volume="WORMW-1182",
> > > >>> Pool="TapeArchive", MediaType="LTO-6" in catalog.
> > > >>> 06-May 12:08 backup2-sd JobId 1038: Please mount append Volume
> > > >>> "WORMW-1182" or label a new one for:
> > > >>> Job: srv1-job.2019-05-06_09.00.01_21
> > > >>> Storage: "LTO-6" (/dev/nst0)
> > > >>> Pool: TapeArchive
> > > >>> Media type: LTO-6
> > > >>> 06-May 12:46 backup2-sd JobId 1038: Error: [SE0203] The
> > Volume=WORMW-1182
> > > >>> on device="LTO-6" (/dev/nst0) appears to be unlabeled.
> > > >>> 06-May 12:47 backup2-sd JobId 1038: Labeled new Volume "WORMW-1182"
> > on
> > > >>> Tape device "LTO-6" (/dev/nst0).
> > > >>> 06-May 12:47 backup2-sd JobId 1038: Wrote label to prelabeled Volume
> > > >>> "WORMW-1182" on Tape device "LTO-6" (/dev/nst0)
> > > >>> 06-May 12:47 backup2-sd JobId 1038: New volume "WORMW-1182" mounted
> > on
> > > >>> device "LTO-6" (/dev/nst0) at 06-May-2019 12:47.
> > > >>> 06-May 12:56 backup2-sd JobId 1038: Fatal error: append.c:170 Error
> > > >>> reading data header from FD. n=-2 msglen=0 ERR=Connection reset by
> > peer
> > > >>> 06-May 12:56 backup2-sd JobId 1038: Elapsed time=00:14:48, Transfer
> > > >>> rate=68.06 M Bytes/second
> > > >>> 06-May 12:56 backup2-sd JobId 1038: Sending spooled attrs to the
> > Director.
> > > >>> Despooling 27,981,780 bytes ...
> > > >>>
> > > >>> so why I got Connection reset by peer message? SD,FD,Director is on
> > the
> > > >>> same machine (in the case of Copy jobs)
> > > >>>
> > > >>> Thanks,
> > > >>> Andras
> > > >>>
> > > >>> On Wed, May 8, 2019 at 3:10 PM Martin Simmons <martin@lispworks.com>
> > > >>> wrote:
> > > >>>
> > > >>>> That look clean.
> > > >>>>
> > > >>>> Are there any messages for the "New Backup JobId" (1038)? I find
> > them
> > > >>>> printed
> > > >>>> after the "Termination:" line for the copy job.
> > > >>>>
> > > >>>> __Martin
> > > >>>>
> > > >>>>
> > > >>>>>>>>> On Wed, 8 May 2019 14:32:31 +0200, Andras Horvai said:
> > >>>>> hi,
> > > >>>>>
> > >>>>> here is the snipped part: :)
> > > >>>>>
> > >>>>> 06-May 09:00 backup2-dir JobId 1037: Copying using JobId=1016
> > >>>>> Job=srv1-job.2019-05-04_02.00.00_59
> > >>>>> 06-May 12:01 backup2-dir JobId 1037: Start Copying JobId 1037,
> > >>>>> Job=ArchiveJob.2019-05-06_09.00.01_20
> > >>>>> 06-May 12:01 backup2-dir JobId 1037: Using Device "FileStorage" to
> > read.
> > >>>>> 06-May 12:01 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1006"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:01 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1006"
> > > >>>> to
> > >>>>> addr=531212699
> > >>>>> 06-May 12:01 backup2-sd JobId 1037: End of Volume "FILEW-1006" at
> > >>>>> addr=2147431799 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:01 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1007"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:01 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1007"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:02 backup2-sd JobId 1037: End of Volume "FILEW-1007" at
> > >>>>> addr=2147475513 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:02 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1008"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:02 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1008"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:02 backup2-sd JobId 1037: End of Volume "FILEW-1008" at
> > >>>>> addr=2147475637 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:02 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1009"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:02 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1009"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:03 backup2-sd JobId 1037: End of Volume "FILEW-1009" at
> > >>>>> addr=2147475644 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:03 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1010"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:03 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1010"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:03 backup2-sd JobId 1037: End of Volume "FILEW-1010" at
> > >>>>> addr=2147475667 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:03 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1011"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:03 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1011"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:04 backup2-sd JobId 1037: End of Volume "FILEW-1011" at
> > >>>>> addr=2147475655 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:04 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1012"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:04 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1012"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:05 backup2-sd JobId 1037: End of Volume "FILEW-1012" at
> > >>>>> addr=2147475652 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:05 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1013"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:05 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1013"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:05 backup2-sd JobId 1037: End of Volume "FILEW-1013" at
> > >>>>> addr=2147475669 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:05 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1014"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:05 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1014"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:05 backup2-sd JobId 1037: End of Volume "FILEW-1014" at
> > >>>>> addr=2147475654 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:05 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1015"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:05 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1015"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:06 backup2-sd JobId 1037: End of Volume "FILEW-1015" at
> > >>>>> addr=2147475661 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:06 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1016"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:06 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1016"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:06 backup2-sd JobId 1037: End of Volume "FILEW-1016" at
> > >>>>> addr=2147475671 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:06 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1017"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:06 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1017"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:07 backup2-sd JobId 1037: End of Volume "FILEW-1017" at
> > >>>>> addr=2147475664 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:07 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1018"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:07 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1018"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:47 backup2-sd JobId 1037: End of Volume "FILEW-1018" at
> > >>>>> addr=2147475651 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:47 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1019"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:47 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1019"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:48 backup2-sd JobId 1037: End of Volume "FILEW-1019" at
> > >>>>> addr=2147475672 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:48 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1020"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:48 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1020"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:49 backup2-sd JobId 1037: End of Volume "FILEW-1020" at
> > >>>>> addr=2147475677 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:49 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1021"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:49 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1021"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:49 backup2-sd JobId 1037: End of Volume "FILEW-1021" at
> > >>>>> addr=2147475654 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:49 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1022"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:49 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1022"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:50 backup2-sd JobId 1037: End of Volume "FILEW-1022" at
> > >>>>> addr=2147475671 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:50 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1023"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:50 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1023"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:50 backup2-sd JobId 1037: End of Volume "FILEW-1023" at
> > >>>>> addr=2147475674 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:50 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1024"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:50 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1024"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:51 backup2-sd JobId 1037: End of Volume "FILEW-1024" at
> > >>>>> addr=2147475677 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:51 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1025"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:51 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1025"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:51 backup2-sd JobId 1037: End of Volume "FILEW-1025" at
> > >>>>> addr=2147475654 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:51 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1026"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:51 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1026"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:52 backup2-sd JobId 1037: End of Volume "FILEW-1026" at
> > >>>>> addr=2147475694 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:52 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1027"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:52 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1027"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:53 backup2-sd JobId 1037: End of Volume "FILEW-1027" at
> > >>>>> addr=2147475665 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:53 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1028"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:53 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1028"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:53 backup2-sd JobId 1037: End of Volume "FILEW-1028" at
> > >>>>> addr=2147475650 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:53 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1029"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:53 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1029"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:54 backup2-sd JobId 1037: End of Volume "FILEW-1029" at
> > >>>>> addr=2147475649 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:54 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1030"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:54 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1030"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:54 backup2-sd JobId 1037: End of Volume "FILEW-1030" at
> > >>>>> addr=2147475651 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:54 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1031"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:54 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1031"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:55 backup2-sd JobId 1037: End of Volume "FILEW-1031" at
> > >>>>> addr=2147475636 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:55 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1032"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:55 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1032"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:55 backup2-sd JobId 1037: End of Volume "FILEW-1032" at
> > >>>>> addr=2147475667 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:55 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1033"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:55 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1033"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:55 backup2-sd JobId 1037: End of Volume "FILEW-1033" at
> > >>>>> addr=2147475633 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:55 backup2-sd JobId 1037: Ready to read from volume
> > > >>>> "FILEW-1034"
> > >>>>> on File device "FileStorage" (/backup).
> > >>>>> 06-May 12:55 backup2-sd JobId 1037: Forward spacing Volume
> > "FILEW-1034"
> > > >>>> to
> > >>>>> addr=238
> > >>>>> 06-May 12:56 backup2-sd JobId 1037: End of Volume "FILEW-1034" at
> > >>>>> addr=895179674 on device "FileStorage" (/backup).
> > >>>>> 06-May 12:56 backup2-sd JobId 1037: Elapsed time=00:54:40, Transfer
> > >>>>> rate=18.42 M Bytes/second
> > >>>>> 06-May 12:56 backup2-dir JobId 1037: Error: Bacula backup2-dir 9.4.1
> > >>>>> (20Dec18):
> > > >>>>>
> > > >>>>>
> > > >>>>>
> > > >>>>>
> > >>>>> On Tue, May 7, 2019 at 6:51 PM Martin Simmons <martin@lispworks.com>
> > > >>>> wrote:
> > > >>>>>> Maybe there is an error message in the text you snipped?
> > > >>>>>>
> > > >>>>>> __Martin
> > > >>>>>>
> > > >>>>>>
> > > >>>>>>>>>>> On Mon, 6 May 2019 23:09:46 +0200, Andras Horvai said:
> > > >>>>>>> Dear List,
> > > >>>>>>>
> > > >>>>>>> does anyone have any clue why I got director error after a tape
> > > >>>> change:
> > > >>>>>> (I
> > > >>>>>>> am using copy job to copy full backups (from file storage) to
> > tape.
> > > >>>>>>>
> > > >>>>>>> Tape change message:
> > > >>>>>>>
> > > >>>>>>> Subject: Bacula: Intervention needed for
> > > >>>> srv1-job.2019-05-06_09.00.01_21
> > > >>>>>>> 06-May 12:08 backup2-sd JobId 1038: Please mount append Volume
> > > >>>>>> "WORMW-1182"
> > > >>>>>>> or label a new one for:
> > > >>>>>>> Job: srv1-job.2019-05-06_09.00.01_21
> > > >>>>>>> Storage: "LTO-6" (/dev/nst0)
> > > >>>>>>> Pool: TapeArchive
> > > >>>>>>> Media type: LTO-6
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>> Then comes this:
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>> 06-May 09:00 backup2-dir JobId 1037: Copying using JobId=1016
> > > >>>>>>> Job=srv1-job.2019-05-04_02.00.00_59
> > > >>>>>>> 06-May 12:01 backup2-dir JobId 1037: Start Copying JobId 1037,
> > > >>>>>>> Job=ArchiveJob.2019-05-06_09.00.01_20
> > > >>>>>>> 06-May 12:01 backup2-dir JobId 1037: Using Device "FileStorage"
> > to
> > > >>>> read.
> > > >>>>>>> ...snip...
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>> 06-May 12:56 backup2-sd JobId 1037: End of Volume "FILEW-1034" at
> > > >>>>>>> addr=895179674 on device "FileStorage" (/backup).
> > > >>>>>>> 06-May 12:56 backup2-sd JobId 1037: Elapsed time=00:54:40,
> > Transfer
> > > >>>>>>> rate=18.42 M Bytes/second
> > > >>>>>>> 06-May 12:56 backup2-dir JobId 1037: Error: Bacula backup2-dir
> > 9.4.1
> > > >>>>>>> (20Dec18):
> > > >>>>>>> Build OS: x86_64-pc-linux-gnu ubuntu 18.04
> > > >>>>>>> Prev Backup JobId: 1016
> > > >>>>>>> Prev Backup Job: srv1-job.2019-05-04_02.00.00_59
> > > >>>>>>> New Backup JobId: 1038
> > > >>>>>>> Current JobId: 1037
> > > >>>>>>> Current Job: ArchiveJob.2019-05-06_09.00.01_20
> > > >>>>>>> Backup Level: Full
> > > >>>>>>> Client: Archiver
> > > >>>>>>> FileSet: "None" 2019-02-02 23:14:56
> > > >>>>>>> Read Pool: "ServersWeeklyFullFile" (From Command
> > > >>>> input)
> > > >>>>>>> Read Storage: "File" (From Pool resource)
> > > >>>>>>> Write Pool: "TapeArchive" (From Command input)
> > > >>>>>>> Write Storage: "LTO-6" (From Command input)
> > > >>>>>>> Catalog: "MyCatalog" (From Client resource)
> > > >>>>>>> Start time: 06-May-2019 12:01:27
> > > >>>>>>> End time: 06-May-2019 12:56:13
> > > >>>>>>> Elapsed time: 54 mins 46 secs
> > > >>>>>>> Priority: 13
> > > >>>>>>> SD Files Written: 104,642
> > > >>>>>>> SD Bytes Written: 60,444,227,085 (60.44 GB)
> > > >>>>>>> Rate: 18394.5 KB/s
> > > >>>>>>> Volume name(s): WORMW-1181|WORMW-1182
> > > >>>>>>> Volume Session Id: 728
> > > >>>>>>> Volume Session Time: 1551107460
> > > >>>>>>> Last Volume Bytes: 34,658,297,856 (34.65 GB)
> > > >>>>>>> SD Errors: 0
> > > >>>>>>> SD termination status: OK
> > > >>>>>>> Termination: *** Copying Error ***
> > > >>>>>>>
> > > >>>>>>>
> > > >>>>>>> Thanks for clarification!
> > > >>>>>>>
> > > >>>>>>> Andras
> > > >>>>>>>
> > > >
> > > > _______________________________________________
> > > > Bacula-users mailing list
> > > > Bacula-users@lists.sourceforge.net
> > > > https://lists.sourceforge.net/lists/listinfo/bacula-users
> > > >
> > >
> > >
> >
>
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic