[prev in list] [next in list] [prev in thread] [next in thread]
List: bacula-users
Subject: Re: [Bacula-users] what does btape actually do?
From: Randy Schultz <schulra () earlham ! edu>
Date: 2014-03-27 19:22:35
Message-ID: alpine.BSF.2.00.1403271521090.60651 () localhost
[Download RAW message or body]
On Wed, 26 Mar 2014, Rados=B3aw Korzeniewski spaketh thusly:
-}
-}Are you sure that tape library drive index 0 is system device /dev/nsa0=
?
-}What mt -f /dev/nsa0 status show to you?
mt -f /dev/nsa0 status
Mode Density Blocksize bpi Compression
Current: 0x58 variable 0 0x1
---------available modes---------
0: 0x58 variable 0 0x1
1: 0x58 variable 0 0x1
2: 0x58 variable 0 0x1
3: 0x58 variable 0 0x1
---------------------------------
Current Driver State: at rest.
---------------------------------
File Number: 0 Record Number: 0 Residual Count 0
mt -f /dev/nsa1 status
Mode Density Blocksize bpi Compression
Current: 0x58 variable 0 0x1
---------available modes---------
0: 0x58 variable 0 0x1
1: 0x58 variable 0 0x1
2: 0x58 variable 0 0x1
3: 0x58 variable 0 0x1
---------------------------------
Current Driver State: at rest.
---------------------------------
File Number: 0 Record Number: 0 Residual Count 0
-}I bet that /dev/nsa1 is a drive index 0 and /dev/nsa0 is a drive index =
1.
Aahh, I had not thought of that scenario. Tnx much.
--
Randy (schulra@earlham.edu) 765.983.1283 <*>
Hatred does not cease by hatred, but only by love; this is the eternal ru=
le.
- Siddhartha Gautama
------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic