[prev in list] [next in list] [prev in thread] [next in thread] 

List:       ataraid-list
Subject:    Re: IDE RAID, htp370/372 help
From:       "Miroslav BENES" <mbenes () tenez ! cz>
Date:       2002-06-27 6:20:54
[Download RAW message or body]

> The kernel will always see the physical disks because of the way RAID is
> done on this controller.

But this is IMHO advantage - when both disks are visible as single disks (for example 
/dev/dhe & /dev/hdg), you can setup params via hdparm. If you use driver from 
Highpoint, you can see only "virtual" SCSI disk, which have less throughput (on HPT370 
chip).


>ecompile a kernel to include support for hptraid and ataraid, and support
> for the hpt37x-series-controller.

I recommend built-in this driver into kernel - not compile as modul. In my PC moduled 
driver reports many errors and was unusable, whereas built-in driver works fine.




Miroslav BENES
system administrator
TENEZ a.s.
Chotebor
Czech Republic
www.tenez.cz



_______________________________________________
Ataraid-list mailing list
Ataraid-list@redhat.com
https://listman.redhat.com/mailman/listinfo/ataraid-list
[prev in list] [next in list] [prev in thread] [next in thread] 

Configure | About | News | Add a list | Sponsored by KoreLogic