[prev in list] [next in list] [prev in thread] [next in thread] 

List:       ataraid-list
Subject:    Re: a question on ide-scsi]
From:       "Forge XP" <forge () dca ! net>
Date:       2002-05-29 13:28:29
[Download RAW message or body]

I was successful in using both. I had ide-scsi compiled in, and no IDE cdrom
support, though, so ALL my cdroms showed up as SCSI devices. It's mildly
confusign at first, but everything works fine with all SCSI, so I leave it
that way.

- Rich 'Forge' Mingin
www.tech-report.com

----- Original Message -----
From: "Victor Secarin" <vsecarin@ParadigmGeo.com>
To: <ataraid-list@redhat.com>
Sent: Tuesday, May 28, 2002 10:42 AM
Subject: [Fwd: a question on ide-scsi]


> Sorry  for  the  typo: that was (of course) 2.4.18 NOT 2.1.18
> Victor Secarin
>
> Victor Secarin wrote:
>
> > >
> > > I have lost the use of my cd-writer.
> >
> > > Should I be able to run a kernel with both 'ataraid' and 'ide-scsi'
> > > enabled? They seem to interfere.
> > >
> > > I have a box with a Promise Fasttrack100 and two EIDE disks that make
an
> > > array (striped).
> > > I also have a CD-writer on the basic EIDE adapter, not the Promise,
> > > connected as primary master.
> > >
> > > I run 2.1.18. The lilo.conf contains root=/dev/ataraid/d0p2 and
> > > boot=/dev/ataraid/d0
> > > and it all boots and works (lilo is 22.3). However, to run cdrecord, I
> > > need  to have  "hda=ide-scsi". Although scsi_mod and ide-scsi seem to
> > > load, both "cdrecord -scanbus" and "scsiinfo -l" fail to find any scsi
> > > devices.
> >
> > >
> > > Does anyone know about this issue?
> > >
> > > Victor Secarin
>
>
>
> _______________________________________________
> Ataraid-list mailing list
> Ataraid-list@redhat.com
> https://listman.redhat.com/mailman/listinfo/ataraid-list
>
>




_______________________________________________
Ataraid-list mailing list
Ataraid-list@redhat.com
https://listman.redhat.com/mailman/listinfo/ataraid-list
[prev in list] [next in list] [prev in thread] [next in thread]