[prev in list] [next in list] [prev in thread] [next in thread]
List: asterisk-gui
Subject: Re: [asterisk-gui] Digital Card Detection and Setup Finished!
From: bkruse <bkruse () digium ! com>
Date: 2007-10-24 15:30:34
Message-ID: 471F651A.7010006 () digium ! com
[Download RAW message or body]
In your init script, zapscan is run and overwrites some
core files, please remove this and try again (its probably
in /etc/init.d/)
-bk
Knox, Marie wrote:
> It probably should but it doesn't. I just found this solution by trial
> and error. On the Wiki, I found the question, but not the answer.
>
> -----Original Message-----
> From: QUICK, RANDY [mailto:RQUICK@THCS.ORG]
> Sent: Wednesday, October 24, 2007 10:15 AM
> To: Asterisk GUI project discussion
> Subject: Re: [asterisk-gui] Digital Card Detection and Setup Finished!
>
> When I make the change in the gui should it not update the zapscan files
> accordingly?
>
> Randy Quick
> Telecom Tech II
> Texoma Medical Center
> rquick@thcs.org
>
>
> -----Original Message-----
> From: asterisk-gui-bounces@lists.digium.com
> [mailto:asterisk-gui-bounces@lists.digium.com] On Behalf Of Knox, Marie
> Sent: Wednesday, October 24, 2007 8:59 AM
> To: Asterisk GUI project discussion
> Subject: Re: [asterisk-gui] Digital Card Detection and Setup Finished!
>
> You have to change it in zaptel.conf.zapscan and Zapata.conf.zapscan.
> Every time you reboot the GUI the values in Zaptel.conf and Zapata.conf
> revert to whatever is in the zapscan files.
>
> -----Original Message-----
> From: QUICK, RANDY [mailto:RQUICK@THCS.ORG]
> Sent: Wednesday, October 24, 2007 8:46 AM
> To: Asterisk GUI project discussion
> Subject: Re: [asterisk-gui] Digital Card Detection and Setup Finished!
>
> Updated zaptel and the card is up but the GUI does not keep all of the
> info and ztcfg still does not work. Could it be because my card is the
> new TE220B?
>
> The GUI never keeps the following in the "Digital Card Setup" form even
> though it's in the conf files:
>
> Framing/Coding
> Line Build Out
>
> Here is my zaptel.conf:
>
> span = 1,1,0,esf,b8zs
> bchan = 1-23
> dchan = 24
> loadzone = us
> defaultzone = us
>
> Here is my users.conf:
>
> [span_1]
> switchtype = qsig
> signalling = pri_cpe
> context = DID_span_1
> group = 1
> trunkname = Span 1
> trunkstyle = digital
> zapchan = 1-23
>
> Thanks,
>
> Randy Quick
> Communicatoins Tech II
> Texoma Medical Center
>
>
> -----Original Message-----
> From: asterisk-gui-bounces@lists.digium.com
> [mailto:asterisk-gui-bounces@lists.digium.com] On Behalf Of Brandon
> Kruse
> Sent: Friday, October 19, 2007 9:21 AM
> To: Asterisk GUI project discussion
> Subject: Re: [asterisk-gui] Digital Card Detection and Setup Finished!
>
> I have no idea why you would have that but not ztcfg.
>
> Recheckout and install zaptel and try again, paste your
> zaptel.conf settings along with users.conf (make sure to update the gui
> to todays revision)
>
> -bk
> ----- Original Message -----
> From: "RANDY QUICK" <RQUICK@THCS.ORG>
> To: "Asterisk GUI project discussion" <asterisk-gui@lists.digium.com>
> Sent: Thursday, October 18, 2007 9:18:12 AM (GMT-0600) America/Chicago
> Subject: Re: [asterisk-gui] Digital Card Detection and Setup Finished!
>
> Yes. It comes preinstalled with asteriskNOW and I haven't removed it.
> It does save the zaptel.conf but it doesn't stay in the gui once it is
> configured.
>
> When I do a "zap show status" I get:
>
> Description Alarms IRQ bpviol
> CRC4
> T2XXP (PCI) Card 0 Span 1 UNCONFIGUR 0 0
> 0
> T2XXP (PCI) Card 0 Span 2 UNCONFIGUR 0 0
> 0
>
>
> It wouldn't see the card without zaptel. Correct?
>
> When I run ztcfg -vv I get:
>
> [root@TEXVOIP-TMC etc]# ztcfg -vv
> bash: ztcfg: command not found
>
> Any more ideas?
>
>
> RQ
>
>
> -----Original Message-----
> From: asterisk-gui-bounces@lists.digium.com
> [mailto:asterisk-gui-bounces@lists.digium.com] On Behalf Of Brandon
> Kruse
> Sent: Wednesday, October 17, 2007 10:25 PM
> To: Asterisk GUI project discussion
> Subject: Re: [asterisk-gui] Digital Card Detection and Setup Finished!
>
> Do you not have zaptel installed?
>
> -bk
> ----- Original Message -----
> From: "RANDY QUICK" <RQUICK@THCS.ORG>
> To: "Asterisk GUI project discussion" <asterisk-gui@lists.digium.com>
> Sent: Wednesday, October 17, 2007 12:46:30 PM (GMT-0800)
> America/Los_Angeles
> Subject: Re: [asterisk-gui] Digital Card Detection and Setup Finished!
>
> Zaptel.conf:
>
> span = 1,1,0,esf,b8zs
> bchan = 1-23
> dchan = 24
> loadzone = us
> defaultzone = us
>
> When I save it does not change zaptel.conf.
>
> I get this with ztcfg -vv:
>
> [root@TEXVOIP-TMC etc]# ztcfg -vv
> bash: ztcfg: command not found
>
> Thanks for the help!
>
> -----Original Message-----
> From: asterisk-gui-bounces@lists.digium.com
> [mailto:asterisk-gui-bounces@lists.digium.com] On Behalf Of bkruse
> Sent: Wednesday, October 17, 2007 2:11 PM
> To: Asterisk GUI project discussion
> Subject: Re: [asterisk-gui] Digital Card Detection and Setup Finished!
>
> Can you check our your save /etc/zaptel.conf
> and restart and see if /etc/zaptel.conf is the same?
>
> When you ztcfg -vv, does it show your card?
> does /etc/zaptel.conf have the card entry?
>
> -bk
>
> QUICK, RANDY wrote:
>
>> Hey guys,
>>
>> Just downloaded the 1697 revision and when I setup the span in Digital
>> Card Setup in the "options" I click "Apply Changes" and am prompted
>>
> that
>
>> I will have to reboot. Once I reboot the settings I just setup are
>> gone.
>>
>> Any ideas?
>>
>> Thanks!
>>
>> The card is labeled as SPAN T2XXP (PCI) Card 0 Span 1
>>
>> -----Original Message-----
>> From: asterisk-gui-bounces@lists.digium.com
>> [mailto:asterisk-gui-bounces@lists.digium.com] On Behalf Of bkruse
>> Sent: Wednesday, October 17, 2007 1:20 PM
>> To: Asterisk GUI project discussion
>> Subject: [asterisk-gui] Digital Card Detection and Setup Finished!
>>
>> Hey Guys,
>>
>> Pari and I just got finished working the digital card detection.
>>
>> It is currently only in branches/asterisknow
>> (http://asteriskNOW.org/install-related for checkout instructions)
>>
>> Download it and try it out with your current hardware, give us some
>> feedback.
>>
>> I am also working on b410p detection/configuration and will keep you
>> updated.
>>
>> This is a big advancement, however!
>>
>> Thanks for sticking with it!
>>
>> -bk
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-gui mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-gui
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-gui mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-gui
>>
>>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-gui mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-gui
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-gui mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-gui
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-gui mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-gui
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-gui mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-gui
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-gui mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-gui
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-gui mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-gui
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-gui mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-gui
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-gui mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-gui
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-gui mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-gui
>
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-gui mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-gui
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic