[prev in list] [next in list] [prev in thread] [next in thread] 

List:       asterisk-dev
Subject:    [Asterisk-Dev] any PA168v IAX developers here slightly OT?
From:       TC <trclark () shaw ! ca>
Date:       2005-06-30 21:30:55
Message-ID: 005401c57dba$fffce500$c901a8c0 () w2ktopcat
[Download RAW message or body]

Heya

I just got one of the IAX2 PA168V chip based ata's
and have been playing with the partly open source firmware

I have few questions about using this dev enviroment
and was wondering if any one here has been a bit further down
this path & would mind swapping some insights about these devices

-----------------------------------------------------------------------
If any one is interested these are some quick crib notes to get the
firmware installled

Download these files
Min requiremnts compiler, cvs srcs ,  & Remote Debugger , the rest is
fluff:)

Compiler
http://aussievoip.com.au/pa1688/keil7.rar
Remote Debugger
http://aredfox.com/download/tools/PalmTool.zip
CVS srcs
:pserver:anoncvs@masters.virttel.com:2401/home/anoncvs
pwd: anoncvs, Module: palmH323

Docs
Remote Debugger Docs
http://aredfox.com/download/English/documents/tech/PalmtoolguideEng.pdf
Dev Guide
http://aredfox.com/download/English/documents/tech/PA1688DevGuideEng.pdf

Main Support Group
Key contact
email: woody@aredfox.com, yahooID: woody_palm
forum: http://groups.yahoo.com/group/pa1688/
Alternate atcom they have h/w based on pa168
Web: www.atcom.com.cn
Forum: http://bbs.pa1688.com/


Compiler install is based on http://www.keil.com/
1) Grab compiler from here
http://aussievoip.com.au/pa1688/keil7.rar
explode in temp InstallDir
see [installdir]\keil7\addon\Serial Number.TXT

run [installdir]\keil7\setup\setup
select full install & enter that serial#

****************************************
PA168 is based on http://aredfox.com/eindex.htm
DownLoads are here http://aredfox.com/edownloadstech.htm
2) PA168 firmware srcs are in cvs
Server
:pserver:anoncvs@masters.virttel.com:2401/home/anoncvs
Passwd
anoncvs
Module
palmH323

3) Set up dev enviroment
edit palmh323\setenv.bat
change these 2 env vars for your keil install & palmh323 srcs

SET PATH_KEILC51=C:\KEIL\C51
SET PATH_PALMAPI=e:\projects\palmh323

4) Test compile
>From dos prompt in the palmh323 dir
run these 2 batch files
setenv.bat
mk pa168v iax2 us

if no error notepad display p_check.txt like this
***********************
Check result:

E:\projects\PA168\palmh323\main>BL51 @linkfile.txt
Program Size: data1.6 xdata"33 codeq537

E:\projects\PA168\palmh323\page7>BL51 @linkfile.txt
Program Size: data.0 xdata=0 code„94

E:\projects\PA168\palmh323\USERRING>BL51 @linkfile.txt
Program Size: data".0 xdata=0 code095

E:\projects\PA168\palmh323\settings>BL51 @linkfile.txt
Program Size: dataC.6 xdatas2 codeI336

E:\projects\PA168\palmh323\PAGE14>BL51 @linkfile.txt
Program Size: data=9.0 xdata=0 codeQ

E:\projects\PA168\palmh323\AUTOTEST>BL51 @linkfile.txt
Program Size: dataw.2 xdata65 code5002

E:\projects\PA168\palmh323\AUTOPROV>BL51 @linkfile.txt
Program Size: data.0 xdata=0 code@7

E:\projects\PA168\palmh323\g723>BL51 @linkfile.txt
Program Size: data4.1 xdata072 codee267

E:\projects\PA168\palmh323\g729>BL51 @linkfile.txt
Program Size: data4.1 xdata072 codeX676

E:\projects\PA168\palmh323\ILBC>BL51 @linkfile.txt
Program Size: data4.1 xdata072 codeR651

E:\projects\PA168\palmh323\LOADDATA>BL51 @linkfile.txt
Program Size: data .5 xdataƒ9 codeE310

E:\projects\PA168\palmh323\page0>BL51 @linkfile.txt
Program Size: data‘.5 xdata"89 codeV199


Check end


[prev in list] [next in list] [prev in thread] [next in thread]