[prev in list] [next in list] [prev in thread] [next in thread] 

List:       asterisk-biz
Subject:    Re: [asterisk-biz] Digium vs. Sangoma Transcoding card
From:       Vahan Yerkanian <vahan () arminco ! com>
Date:       2010-10-31 13:17:30
Message-ID: 4CCD6C6A.5070103 () arminco ! com
[Download RAW message or body]

On 10/31/10 1:24 PM, F6HQZ wrote:
> Mike,
>
> You must say that you want the 120 exclusive G.729 channels to the
> driver with this Linux shell command :
>
> rmmmod wctc4xxp
> modprobe wctc4xxp mode=g729
>
> That's all !
>
> Best Regards,
> Francois
>
And if you want to enable this setting everytime dahdi starts, add

options wctc4xxp mode=g729

to /etc/modprobe.d/dahdi.conf

HTH,
Vahan
> Le 29/10/2010 16:21, Mike a écrit :
>> Is there a config I need to put in to get to 120? Or does the firmware
>> control that, and I got sold an old card by my distributor last week?
>>
>> Mike
>>


-- 
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-biz mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-biz

[prev in list] [next in list] [prev in thread] [next in thread] 

Configure | About | News | Add a list | Sponsored by KoreLogic