[prev in list] [next in list] [prev in thread] [next in thread] 

List:       android-virt
Subject:    [RFC PATCH v2 06/23] arm64/sve: Check SVE virtualisability
From:       Dave Martin <Dave.Martin () arm ! com>
Date:       2018-09-28 13:39:10
Message-ID: 1538141967-15375-7-git-send-email-Dave.Martin () arm ! com
[Download RAW message or body]

Due to the way the effective SVE vector length is controlled and
trapped at different exception levels, certain mismatches in the
sets of vector lengths supported by different physical CPUs in the
system may prevent straightforward virtualisation of SVE at parity
with the host.

This patch analyses the extent to which SVE can be virtualised
safely without interfering with migration of vcpus between physical
CPUs, and rejects late secondary CPUs that would erode the
situation further.

It is left up to KVM to decide what to do with this information.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
---

Changes since RFCv1:

 * The analysis done by this patch is the same as in the previous
   version, but the commit message the printks etc. have been reworded
   to avoid the suggestion that KVM is expected to work on a system with
   mismatched SVE implementations.
---
 arch/arm64/include/asm/fpsimd.h |  1 +
 arch/arm64/kernel/cpufeature.c  |  2 +-
 arch/arm64/kernel/fpsimd.c      | 87 +++++++++++++++++++++++++++++++++++------
 3 files changed, 76 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index dd1ad39..964adc9 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -87,6 +87,7 @@ extern void sve_kernel_enable(const struct arm64_cpu_capabilities *__unused);
 extern u64 read_zcr_features(void);
 
 extern int __ro_after_init sve_max_vl;
+extern int __ro_after_init sve_max_virtualisable_vl;
 
 #ifdef CONFIG_ARM64_SVE
 
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index e238b79..aa1a55b 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -1531,7 +1531,7 @@ static void verify_sve_features(void)
 	unsigned int len = zcr & ZCR_ELx_LEN_MASK;
 
 	if (len < safe_len || sve_verify_vq_map()) {
-		pr_crit("CPU%d: SVE: required vector length(s) missing\n",
+		pr_crit("CPU%d: SVE: vector length support mismatch\n",
 			smp_processor_id());
 		cpu_die_early();
 	}
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 42aa154..d28042b 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/bitmap.h>
+#include <linux/bitops.h>
 #include <linux/bottom_half.h>
 #include <linux/bug.h>
 #include <linux/cache.h>
@@ -48,6 +49,7 @@
 #include <asm/sigcontext.h>
 #include <asm/sysreg.h>
 #include <asm/traps.h>
+#include <asm/virt.h>
 
 #define FPEXC_IOF	(1 << 0)
 #define FPEXC_DZF	(1 << 1)
@@ -130,14 +132,18 @@ static int sve_default_vl = -1;
 
 /* Maximum supported vector length across all CPUs (initially poisoned) */
 int __ro_after_init sve_max_vl = SVE_VL_MIN;
+int __ro_after_init sve_max_virtualisable_vl = SVE_VL_MIN;
 /* Set of available vector lengths, as vq_to_bit(vq): */
 static __ro_after_init DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
+/* Set of vector lengths present on at least one cpu: */
+static __ro_after_init DECLARE_BITMAP(sve_vq_partial_map, SVE_VQ_MAX);
 static void __percpu *efi_sve_state;
 
 #else /* ! CONFIG_ARM64_SVE */
 
 /* Dummy declaration for code that will be optimised out: */
 extern __ro_after_init DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
+extern __ro_after_init DECLARE_BITMAP(sve_vq_partial_map, SVE_VQ_MAX);
 extern void __percpu *efi_sve_state;
 
 #endif /* ! CONFIG_ARM64_SVE */
@@ -623,11 +629,8 @@ int sve_get_current_vl(void)
 	return sve_prctl_status(0);
 }
 
-/*
- * Bitmap for temporary storage of the per-CPU set of supported vector lengths
- * during secondary boot.
- */
-static DECLARE_BITMAP(sve_secondary_vq_map, SVE_VQ_MAX);
+/* Bitmaps for temporary storage during manipulation of vector length sets */
+static DECLARE_BITMAP(sve_tmp_vq_map, SVE_VQ_MAX);
 
 static void sve_probe_vqs(DECLARE_BITMAP(map, SVE_VQ_MAX))
 {
@@ -650,6 +653,7 @@ static void sve_probe_vqs(DECLARE_BITMAP(map, SVE_VQ_MAX))
 void __init sve_init_vq_map(void)
 {
 	sve_probe_vqs(sve_vq_map);
+	bitmap_copy(sve_vq_partial_map, sve_vq_map, SVE_VQ_MAX);
 }
 
 /*
@@ -658,24 +662,60 @@ void __init sve_init_vq_map(void)
  */
 void sve_update_vq_map(void)
 {
-	sve_probe_vqs(sve_secondary_vq_map);
-	bitmap_and(sve_vq_map, sve_vq_map, sve_secondary_vq_map, SVE_VQ_MAX);
+	sve_probe_vqs(sve_tmp_vq_map);
+	bitmap_and(sve_vq_map, sve_vq_map, sve_tmp_vq_map,
+		   SVE_VQ_MAX);
+	bitmap_or(sve_vq_partial_map, sve_vq_partial_map, sve_tmp_vq_map,
+		  SVE_VQ_MAX);
 }
 
 /* Check whether the current CPU supports all VQs in the committed set */
 int sve_verify_vq_map(void)
 {
-	int ret = 0;
+	int ret = -EINVAL;
+	unsigned long b;
 
-	sve_probe_vqs(sve_secondary_vq_map);
-	bitmap_andnot(sve_secondary_vq_map, sve_vq_map, sve_secondary_vq_map,
-		      SVE_VQ_MAX);
-	if (!bitmap_empty(sve_secondary_vq_map, SVE_VQ_MAX)) {
+	sve_probe_vqs(sve_tmp_vq_map);
+
+	bitmap_complement(sve_tmp_vq_map, sve_tmp_vq_map, SVE_VQ_MAX);
+	if (bitmap_intersects(sve_tmp_vq_map, sve_vq_map, SVE_VQ_MAX)) {
 		pr_warn("SVE: cpu%d: Required vector length(s) missing\n",
 			smp_processor_id());
-		ret = -EINVAL;
+		goto error;
+	}
+
+	if (!IS_ENABLED(CONFIG_KVM) || !is_hyp_mode_available())
+		goto ok;
+
+	/*
+	 * For KVM, it is necessary to ensure that this CPU doesn't
+	 * support any vector length that guests may have probed as
+	 * unsupported.
+	 */
+
+	/* Recover the set of supported VQs: */
+	bitmap_complement(sve_tmp_vq_map, sve_tmp_vq_map, SVE_VQ_MAX);
+	/* Find VQs supported that are not globally supported: */
+	bitmap_andnot(sve_tmp_vq_map, sve_tmp_vq_map, sve_vq_map, SVE_VQ_MAX);
+
+	/* Find the lowest such VQ, if any: */
+	b = find_last_bit(sve_tmp_vq_map, SVE_VQ_MAX);
+	if (b >= SVE_VQ_MAX)
+		goto ok; /* no mismatches */
+
+	/*
+	 * Mismatches above sve_max_virtualisable_vl are fine, since
+	 * no guest is allowed to configure ZCR_EL2.LEN to exceed this:
+	 */
+	if (sve_vl_from_vq(bit_to_vq(b)) <= sve_max_virtualisable_vl) {
+		pr_warn("SVE: cpu%d: Unsupported vector length(s) present\n",
+			smp_processor_id());
+		goto error;
 	}
 
+ok:
+	ret = 0;
+error:
 	return ret;
 }
 
@@ -743,6 +783,7 @@ u64 read_zcr_features(void)
 void __init sve_setup(void)
 {
 	u64 zcr;
+	unsigned long b;
 
 	if (!system_supports_sve())
 		return;
@@ -771,11 +812,31 @@ void __init sve_setup(void)
 	 */
 	sve_default_vl = find_supported_vector_length(64);
 
+	bitmap_andnot(sve_tmp_vq_map, sve_vq_partial_map, sve_vq_map,
+		      SVE_VQ_MAX);
+
+	b = find_last_bit(sve_tmp_vq_map, SVE_VQ_MAX);
+	if (b >= SVE_VQ_MAX)
+		/* No non-virtualisable VLs found */
+		sve_max_virtualisable_vl = SVE_VQ_MAX;
+	else if (WARN_ON(b == SVE_VQ_MAX - 1))
+		/* No virtualisable VLs?  This is architecturally forbidden. */
+		sve_max_virtualisable_vl = SVE_VQ_MIN;
+	else /* b + 1 < SVE_VQ_MAX */
+		sve_max_virtualisable_vl = sve_vl_from_vq(bit_to_vq(b + 1));
+
+	if (sve_max_virtualisable_vl > sve_max_vl)
+		sve_max_virtualisable_vl = sve_max_vl;
+
 	pr_info("SVE: maximum available vector length %u bytes per vector\n",
 		sve_max_vl);
 	pr_info("SVE: default vector length %u bytes per vector\n",
 		sve_default_vl);
 
+	/* KVM decides whether to support mismatched systems. Just warn here: */
+	if (sve_max_virtualisable_vl < sve_max_vl)
+		pr_info("SVE: unvirtualisable vector lengths present\n");
+
 	sve_efi_setup();
 }
 
-- 
2.1.4

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
[prev in list] [next in list] [prev in thread] [next in thread] 

Configure | About | News | Add a list | Sponsored by KoreLogic