[prev in list] [next in list] [prev in thread] [next in thread]
List: amavis-user
Subject: Re: Bypass amavis scanning of locally generated mail on a dual Sendmail system
From: Patrick Ben Koetter <p () sys4 ! de>
Date: 2012-11-06 19:24:34
Message-ID: 20121106192433.GA3756 () sys4 ! de
[Download RAW message or body]
Hi Andy,
* Andy Harrelson <aharrelson@autojobs.com>:
> If you're reading this, then you probably discovered what I discovered:
> turns out that most people who use amavisd-new also use Postfix, not
> Sendmail. If I had wanted instructions for bypassing amavis scanning using
indeed ...
> but through a little trial and error, I did find a solution that works. So
> for anyone else who has been frustrated by a lack of information on the
> subject, here's what I ended up doing:
Loooong cut. Good writing. Thanks for summing it up. Now we have good Sendmail
instructions too!
p@rick
--
[*] sys4 AG
http://sys4.de, +49 (89) 30 90 46 64
Franziskanerstraße 15, 81669 München
Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263
Vorstand: Patrick Ben Koetter, Axel von der Ohe, Marc Schiffbauer
Aufsichtsratsvorsitzender: Joerg Heidrich
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic