[prev in list] [next in list] [prev in thread] [next in thread] 

List:       amanda-users
Subject:    Re: error: "ERROR: fiume.localnet usr: data-path is AMANDA but device do not support it"
From:       Jean-Louis Martineau <martineau () zmanda ! com>
Date:       2014-02-26 16:25:25
Message-ID: 530E1575.7020002 () zmanda ! com
[Download RAW message or body]

Charles,

It erroneously report 'data-path is AMANDA but device do not support it' 
because it didn't find a tape to use.
This is already fixed in SVN, the fix will be in 3.3.6

Jean-Louis

On 02/18/2014 04:30 AM, Charles Stroom wrote:
> I noticed the following when I do an amcheck:
> "
> Amanda Tape Server Host Check
> -----------------------------
> Holding disk /work/amanda/dumps: 29732864 KB disk space available,
> using 29528064 KB slot 1: volume 'dds4-03'
> Will write to volume 'dds4-03' in slot 1.
> NOTE: skipping tape-writable test
> Server check took 3.753 seconds
>
> Amanda Backup Client Hosts Check
> --------------------------------
> Client check: 2 hosts checked in 2.384 seconds.  0 problems found.
>
> (brought to you by Amanda 3.3.5)
> "
>
> This looks fine, but if I only take the tape out (single dds4 tape
> drive, no changer), I get:
> "
> Amanda Tape Server Host Check
> -----------------------------
> Holding disk /work/amanda/dumps: 29732864 KB disk space available, using 29528064 KB
> slot 1: Tape device /dev/nst1 is not ready or is empty
>   all slots have been loaded
> Taper scan algorithm did not find an acceptable volume.
>      (expecting volume 'dds4-03' or a new volume)
> ERROR: No acceptable volumes found
> ERROR: fiume.localnet usr: data-path is AMANDA but device do not support it
> ERROR: fiume.localnet Homes: data-path is AMANDA but device do not support it
> ERROR: fiume.localnet home-charles: data-path is AMANDA but device do not support it
> ERROR: fiume.localnet Pictures_rest: data-path is AMANDA but device do not support it
> ERROR: fiume.localnet Pictures_800IS: data-path is AMANDA but device do not support it
> ERROR: fiume.localnet Pictures_G2: data-path is AMANDA but device do not support it
> ERROR: fiume.localnet Wine: data-path is AMANDA but device do not support it
> ERROR: fiume.localnet Hobbies: data-path is AMANDA but device do not support it
> ERROR: fiume.localnet Mail: data-path is AMANDA but device do not support it
> ERROR: fiume.localnet Vbox-2: data-path is AMANDA but device do not support it
> ERROR: fiume.localnet Vbox-1: data-path is AMANDA but device do not support it
> ERROR: fiume.localnet root: data-path is AMANDA but device do not support it
> ERROR: stremen.localnet my_data: data-path is AMANDA but device do not support it
> Server check took 0.262 seconds
>
> Amanda Backup Client Hosts Check
> --------------------------------
> Client check: 2 hosts checked in 2.389 seconds.  0 problems found.
>
> (brought to you by Amanda 3.3.5)
> "
>
> Odd, whatever it means.
>
> Regards, Charles
>
>
>
>
>
>

[prev in list] [next in list] [prev in thread] [next in thread]