[prev in list] [next in list] [prev in thread] [next in thread]
List: amanda-users
Subject: SOLVED: Cryptic Error with 2 different versions of amanda: THANK YOU!
From: Brendon Martino <bmartino () analogic ! com>
Date: 2013-04-29 18:14:46
Message-ID: 517EB896.7020404 () analogic ! com
[Download RAW message or body]
Ok, Jean-Louis, I think you nailed it! Here's what I did:
I changed my amanda.conf to include a second dump type only for fc5 systems:
######################################
# For most Linux (Fc17+):
######################################
define dumptype hard-disk-tar {
hard-disk-dump
#index yes
holdingdisk no
comment "Back up to hard disk instead of tape - using tar"
program "GNUTAR"
}
######################################
# For FC5 Linux:
######################################
define dumptype hard-disk-tar2 {
hard-disk-dump
#index yes
holdingdisk no
comment "Back up to hard disk instead of tape - using tar"
program "GNUTAR"
# needed for old protocols in fc5:
auth "bsd"
}
Then I changed the disklist entry like so:
#fc5client.analogic.com /usr/local/bin hard-disk-tar
fc5client.analogic.com /usr/local/bin hard-disk-tar2
And the amcheck result was good!
Amanda Backup Client Hosts Check
--------------------------------
Client check: 1 host checked in 2.398 seconds. 0 problems found.
The dump succeeded as well!
I think that solves it!! THANK YOU Jean-Louis!!!!
--Brendon Martino
On 04/29/2013 02:09 PM, Jean-Louis Martineau wrote:
> On 04/29/2013 02:05 PM, Brendon Martino wrote:
>>
>> Ok, here is the result:
>>
>>
>> sudo -u amandabackup /sbin/amadmin DailySet1 disklist
>>
>> line 63:
>> host fc5client.analogic.com:
>> interface default
>> disk /usr/local/bin:
>> program "GNUTAR"
>> data-path AMANDA
>> priority 2
>> dumpcycle 7
>> maxdumps 1
>> maxpromoteday 10000
>> bumpsize 20480
>> bumpdays 1
>> bumpmult 4.000000
>> strategy STANDARD
>> ignore NO
>> estimate CLIENT
>> compress CLIENT FAST
>> comprate 0.50 0.50
>> encrypt NONE
>> auth "BSDTCP"
> Set it to "BSD"
>> kencrypt NO
>> amandad-path ""
>> client-username ""
>> client-port ""
>> ssh-keys ""
>> holdingdisk NEVER
>> record YES
>> index YES
>> starttime 0000
>> fallback-splitsize 10Mb
>> skip-incr NO
>> skip-full NO
>> allow-split YES
>> spindle -1
>>
>>
>>
>> What's missing here?
>
>
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic