[prev in list] [next in list] [prev in thread] [next in thread]
List: aix4fixes
Subject: Re: New_AIXV4_Fixes
From: AIX Service Mail Server <aixserv () austin ! ibm ! com>
Date: 2002-07-23 7:39:12
[Download RAW message or body]
APAR: IY24636 COMPID: 5765D5100 REL: 330
ABSTRACT: DIAGS FAILING INVALIDLY
PROBLEM DESCRIPTION:
When cfgmgr runs diags against the SP-Switch2 adapter, the diags
routing may fail or not complete. This leaves the status of thea
adapter in the " diag_fail " state. Later rc.switch will fail
and the adpater will not join the switch.
PROBLEM SUMMARY:
There is a potential for adapter reset to be run
concurrently during diagnostics.
PROBLEM CONCLUSION:
Added locking to device driver calls to adapter reset to
prevent simultaneous resets during diagnostics.
------
APAR: IY26360 COMPID: 5765D5100 REL: 330
ABSTRACT: CSS.SNAP MAY NOT CONTAIN CADD_DUMP.OUT
PROBLEM DESCRIPTION:
The css.snap script may not collect the cadd_dump.out file,
which can be helpful in debugging certain SP switch 2 problems.
PROBLEM SUMMARY:
In some cases in which the css.snap script is run
to collect data for an SP Switch 2 problem, the
trace from the device driver (cad_dump.out) will
not be collected.
PROBLEM CONCLUSION:
The css.snap script has been changed to ensure, for the
SP Switch 2, the device driver trace (cadd_dump.out) is
always collected when the css.snap command is run.
------
APAR: IY27275 COMPID: 5765E0300 REL: 711
ABSTRACT: XLF711: PERFORMANCE DEGRADATION WITH -Q64
PROBLEM DESCRIPTION:
Using option -q64 the performance of the executable is low,
50 percent of an 32 bit executable.
LOCAL FIX:
Omit the option -q64
------
APAR: IY27560 COMPID: 5765E0200 REL: 711
ABSTRACT: INTERNAL COMPILER ERROR WITH -QSMP=OMP, AND WITHOUT ONE.
PROBLEM DESCRIPTION:
Internal compiler error with -qsmp=omp, and without one.
------
APAR: IY27676 COMPID: 5765D5100 REL: 330
ABSTRACT: SP SWITCH 2 WINDOW SUSPEND FAILURE AFTER LOADLEVELER HAS TRIED
PROBLEM DESCRIPTION:
On the SP Switch 2, a failure may occur suspending windows if
a job fails to respond to the suspend request that is issued
during switch recovery. This problem can happen if a job has
a SIGKILL pending (having been killed by LoadLeveler) but has
not yet fully processed the SIGKILL because a thread is in a
system call with signals blocked. When the windows fail to
suspend because of a non-responsive job, switch recovery will
fail on the affected node, and switch responds will be lost on
the affected switch plane.
PROBLEM SUMMARY:
Nodes can drop off the SP Switch 2 when the switch device
driver fails to suspend jobs that are running. The
adapter.log will show the following error:
QUERY SUSPEND WINDOW_COMPLETION ioctl failed
PROBLEM CONCLUSION:
The device driver for the SP Switch 2 has been changed
to allow suspend requests to be properly handled for
jobs that are starting or stopping.
------
APAR: IY27793 COMPID: 5765E0200 REL: 711
ABSTRACT: WRONG OPTIMIZATION LEVEL WITH -QSMP=OMP:NOOPT.
PROBLEM DESCRIPTION:
Wrong optimization level with -qsmp=omp:noopt.
------
APAR: IY28000 COMPID: 5765E0200 REL: 711
ABSTRACT: UNEXPECTED ERROR WITH OPTIONAL BLANKS & FREE SOURCE FORM.
PROBLEM DESCRIPTION:
Unexpected error with optional blanks & free source form.
------
APAR: IY28612 COMPID: 5765E0200 REL: 710
ABSTRACT: ILLEGAL INSTRUCTION/SEGMENTATION FAULT WITH -QSMP.
PROBLEM DESCRIPTION:
Illegal Instruction/Segmentation Fault with -qsmp.
------
APAR: IY28961 COMPID: 5765E0200 REL: 711
ABSTRACT: INTERNAL COMPILER ERROR WITH -QSMP -Q64 INVOLVING MODULES.
PROBLEM DESCRIPTION:
Internal compiler error with -qsmp -q64 involving modules.
------
APAR: IY28983 COMPID: 5765E0200 REL: 711
ABSTRACT: INCORRECT OUTPUT WITH -QSMP=OMP INVOLVING INTRINSICS.
PROBLEM DESCRIPTION:
Incorrect output with -qsmp=omp involving intrinsics.
------
APAR: IY29377 COMPID: 5765E0200 REL: 711
ABSTRACT: INCORRECT OUTPUT WITH -QIPA.
PROBLEM DESCRIPTION:
Incorrect output with -qipa.
------
APAR: IY29420 COMPID: 5765D5100 REL: 330
ABSTRACT: RAS: IMPROVE CSS.SNAP DATA COLLECTION
PROBLEM DESCRIPTION:
The css.snap command needs to improve the data collected on some
'soft' snaps.
PROBLEM SUMMARY:
A 'soft' css.snap command needs to collect a switch adapter
microcode dump under certain conditions.
PROBLEM CONCLUSION:
The css.snap script has been changed to improve RAS.
The changes allow for a soft css.snap to collect a switch
adapter microcode dump in certain cases.
------
APAR: IY29793 COMPID: 5765E0200 REL: 711
ABSTRACT: ERROR IN P2_FSTM.
PROBLEM DESCRIPTION:
Error in P2_FSTM.
------
APAR: IY29881 COMPID: 5765E0200 REL: 711
ABSTRACT: MISSING LINE NUMBERS IN TRACEBACK ON AIX51 AND 64BIT PATH.
PROBLEM DESCRIPTION:
Missing line numbers in traceback on AIX51 and 64bit path.
------
APAR: IY29882 COMPID: 5765E0200 REL: 711
ABSTRACT: INTERNAL COMPILER ERROR WITH -O.
PROBLEM DESCRIPTION:
Internal compiler error with -O.
------
APAR: IY30007 COMPID: 5765E0200 REL: 711
ABSTRACT: CODE GENERATION ERROR WITH -QSMP.
PROBLEM DESCRIPTION:
Code generation error with -qsmp.
------
APAR: IY30010 COMPID: 5765E0200 REL: 711
ABSTRACT: CODE GENERATION ERROR WITH -QSMP=NOAUTO|OMP.
PROBLEM DESCRIPTION:
Code generation error with -qsmp=noauto|omp.
------
APAR: IY30013 COMPID: 5765E0200 REL: 711
ABSTRACT: INTERNAL COMPILER ERROR WITH -QARCH=PWR3 -O.
PROBLEM DESCRIPTION:
Internal compiler error with -qarch=pwr3 -O.
------
APAR: IY30014 COMPID: 5765E0200 REL: 711
ABSTRACT: INTERNAL COMPILER ERROR WITH -QARCH=PWR2 -O3 -QSTRICT.
PROBLEM DESCRIPTION:
Internal compiler error with -qarch=pwr2 -O3 -qstrict.
------
APAR: IY30015 COMPID: 5765E0200 REL: 711
ABSTRACT: CODE GENERATION ERROR WITH -O3 -QHOT.
PROBLEM DESCRIPTION:
Code generation error with -O3 -qhot.
------
APAR: IY30266 COMPID: 5765E0200 REL: 711
ABSTRACT: INTERNAL COMPILER ERROR WITH -QHOT INVOLVING FORALL STATEMENT.
PROBLEM DESCRIPTION:
Internal compiler error with -qhot involving FORALL statement.
------
APAR: IY30302 COMPID: 5765E0200 REL: 711
ABSTRACT: SEGMENTATION FAULT WITH -QHOT INVOLVING LARGE ARRAYS.
PROBLEM DESCRIPTION:
Segmentation fault with -qhot involving large arrays.
------
APAR: IY30348 COMPID: 5765E0200 REL: 711
ABSTRACT: INCORRECT OUTPUT WITH -QSMP.
PROBLEM DESCRIPTION:
Incorrect output with -qsmp.
------
APAR: IY30399 COMPID: 5765E0200 REL: 711
ABSTRACT: SEGMENTATION FAULT WITH -QSMP -Q64 -QREALSIZE=8.
PROBLEM DESCRIPTION:
Segmentation Fault with -qsmp -q64 -qrealsize=8.
------
APAR: IY30887 COMPID: 5648C9802 REL: 430
ABSTRACT: SDK 1.3.1 32-BIT PTF 1
PROBLEM DESCRIPTION:
Fix information will be added later
PROBLEM SUMMARY:
Fixes since GA code (ca1311-20011123a) :
(Note: The descriptions here have been truncated.)
+----------+--------+-------+---------------------------------+
|20011128 |37145 | |Interoperability Problem- FVD |
+----------+--------+-------+---------------------------------+
|20011130 |38836 | |idlj NPE in Parser.processEmitLis|
+----------+--------+-------+---------------------------------+
|20011220 |39092 | |DBCS text spills JButton in motif|
+----------+--------+-------+---------------------------------+
|20011221 |38831 | |JITC SEGVs when compiling method |
+----------+--------+-------+---------------------------------+
|20011221 |39435 | |Memory Leak in DefaultPopupFactor|
+----------+--------+-------+---------------------------------+
|20011228 |39633 | |error handler tag_ (Bean Introspe|
+----------+--------+-------+---------------------------------+
|20020104 |39430 | |JFileChooser Clears suggested Fil|
+----------+--------+-------+---------------------------------+
|20020108 |39357 | |internString concurrency problem |
+----------+--------+-------+---------------------------------+
|20020109 |39481 | |DISABLE_JAVADUMP through runtime |
+----------+--------+-------+---------------------------------+
|20020112 |39880 | |<p> tag rendered slightly bh
+----------+--------+-------+---------------------------------+
|20020115 |40008 |IY27249|JNI->ExceptionDescribe can pric
+----------+--------+-------+---------------------------------+
|20020117 |39891 |PQ56430|Problem with java.net.URLEncoder/|
+----------+--------+-------+---------------------------------+
|20020118 |39618 | |I/O Exception for Non-Executable |
+----------+--------+-------+---------------------------------+
|20020130 |40644 | |JToolBar Repositioning Defect |
+----------+--------+-------+---------------------------------+
|20020205 |39866 | |CORBA BAD_OPERATION in StubDelega|
+----------+--------+-------+---------------------------------+
|20020205 |40792 | |Java App - Printing doesn't work |
+----------+--------+-------+---------------------------------+
|20020208 |40871 | |ZipFile throws "extra header info|
+----------+--------+-------+---------------------------------+
|20020209 |40825 | |JDK131 BIgDecimal.class is not ba|
+----------+--------+-------+---------------------------------+
|20020213 |40897 | |JOptionPane - Cut off text with T|
+----------+--------+-------+---------------------------------+
|20020215 |41034 | |javac language problem on Double |
+----------+--------+-------+---------------------------------+
|20020216 |40837 | |README incorrect about AIX pre-re|
+----------+--------+-------+---------------------------------+
|20020220 |40880 | |sysThreadIsInterrupted causes dea|
+----------+--------+-------+---------------------------------+
|20020220 |40919 | |JDK 1.3.1 causes NullPointerExcep|
+----------+--------+-------+---------------------------------+
|20020220 |41155 | |BigDecimal does not handle double|
+----------+--------+-------+---------------------------------+
|20020226 |40788 | |ORB swallows OutOfMemoryError err|
+----------+--------+-------+---------------------------------+
|20020306 |41165 | |JIT:Core dump |
+----------+--------+-------+---------------------------------+
|20020306 |41377 | |Use of strerror in panicHandler c|
+----------+--------+-------+---------------------------------+
|20020309 |39473 | |Cannot navigate the print dialog |
+----------+--------+-------+---------------------------------+
|20020312 |41517 | |Missing TCS on request after LOC_|
+----------+--------+-------+---------------------------------+
|20020314 |40945 | |URL(URL, String) incorrect relati|
+----------+--------+-------+---------------------------------+
|20020316 |40035 | |intermittent de-serialization fai|
+----------+--------+-------+---------------------------------+
|20020326 |41847 | |Cannot backtab from JComboBox |
+----------+--------+-------+---------------------------------+
|20020329 |42303 | |Abstract: |
+----------+--------+-------+---------------------------------+
|20020410 |40105 | |Add 'class name' to NotSerializab|
+----------+--------+-------+---------------------------------+
|20020419 |42832 | |Memory leak in javacore function |
+----------+--------+-------+---------------------------------+
|20020503 |50347 | |Improve reset performance for Sha|
+----------+--------+-------+---------------------------------+
|20020511 |50584 | |Closing a Frame with Alt-F4 cause|
+----------+--------+-------+---------------------------------+
|20020517 |42197 | |SIGABRT with SAP |
+----------+--------+-------+---------------------------------+
|20020530 |51363 | |UnsatisfiedLinkError message is u|
+----------+--------+-------+---------------------------------+
|20020531 |50370 | |DATA_CONVERSION in local copyObje|
+----------+--------+-------+---------------------------------+
|20020531 |51315 | |'end tag' interop fix backport to|
+----------+--------+-------+---------------------------------+
|20020613 |51967 | |ECPerf crash on orbn130-2002/01/1|
+----------+--------+-------+---------------------------------+
|20020614 |51154 | |Can't allocate > 1G arrays on |
+----------+--------+-------+---------------------------------+
PROBLEM CONCLUSION:
All of the above defects have been fixed
------
APAR: IY30934 COMPID: 5765E0200 REL: 711
ABSTRACT: INTERNAL COMPILER ERROR WITH -O3 & LARGE NUMBER OF ASSIGNMENT ST
PROBLEM DESCRIPTION:
Internal compiler error with -O3 & large number of assignment st
atements.
------
APAR: IY31120 COMPID: 5765E0200 REL: 711
ABSTRACT: INCORRECT OUTPUT WITH -QARCH=PWR3 -O3.
PROBLEM DESCRIPTION:
Incorrect output with -qarch=pwr3 -O3.
------
APAR: IY31152 COMPID: 5765E0200 REL: 711
ABSTRACT: XLF MAN PAGE CONTAINS INVALID SUBOPTIONS OF -QESSL.
PROBLEM DESCRIPTION:
xlf man page contains invalid suboptions of -qessl.
------
APAR: IY31243 COMPID: 5765D5100 REL: 330
ABSTRACT: BAD DMA WRITE FOR KLAPI 0-COPY MSG
PROBLEM DESCRIPTION:
bad dma write for klapi 0-copy msg
PROBLEM SUMMARY:
There is a time hole where a DMA buffer may
remain posted after a message is marked as complete to the user.
This leaves the possibility of data corruption or, in the case
of a Regatta, a system check stop.
PROBLEM CONCLUSION:
All outstanding DMA buffers are cancelled
before a buffer is marked as complete to the user.
------
APAR: IY31312 COMPID: 5765E2600 REL: 500
ABSTRACT: UNABLE TO COMPILE VAC++ RPC WRAPPERS ON AIX5L IN 64-BIT MODE
PROBLEM DESCRIPTION:
If rpc.h is #included in a program, it fails to compile on AIX
5L in 64-bit mode only. Works fine in other combinations. If the
system-supplied RPC headers are included explicitly from
/usr/include/rpc, a program compiles clean.
Expected results:
==================
Clean compile.
Actual results:
================
$ cat t.cpp
// t.cpp
#include <rpc/rpc.h>
$ xlC -c -q64 t.cpp
"/usr/include/rpc/clnt.h", line 101.35: 1540-0040 (S) The text
"low" is unexpected. "rpcvers_t" may be undeclared or
ambiguous.
"/usr/include/rpc/clnt.h", line 132.63: 1540-0063 (S) The text
"rpcproc_t" is unexpected.
"/usr/include/rpc/clnt.h", line 261.15: 1540-0040 (S) The text
"*" is unexpected. "CLIENT" may be undeclared or ambiguous.
"/usr/include/rpc/clnt.h", line 267.15: 1540-0040 (S) The text
"*" is unexpected. "CLIENT" may be undeclared or ambiguous.
"/usr/include/rpc/clnt.h", line 273.15: 1540-0040 (S) The text
"*" is unexpected. "CLIENT" may be undeclared or ambiguous.
"/usr/include/rpc/clnt.h", line 289.15: 1540-0040 (S) The text
LOCAL FIX:
// t.cpp
// Include RPC headers explicitely
#include "/usr/include/rpc/types.h"
#include <netinet/in.h>
#include "/usr/include/rpc/xdr.h"
#include "/usr/include/rpc/auth.h"
#include "/usr/include/rpc/clnt.h"
#include "/usr/include/rpc/rpc_msg.h"
#include "/usr/include/rpc/auth_unix.h"
#include "/usr/include/rpc/auth_des.h"
#include "/usr/include/rpc/svc.h"
#include "/usr/include/rpc/svc_auth.h"
PROBLEM SUMMARY:
Fixed in July 2002 PTF.
------
APAR: IY31778 COMPID: 5765E8200 REL: 230
ABSTRACT: HAGEO/GEORM SYNC_GMDS: INCORRECT STATEMAP DEV NAME DURING MKDEV
PROBLEM DESCRIPTION:
If you define more that 3 nodes per site, GMD synchronization
fails. State map device name index is always set to 0 for the
the local node. This does not correspond to the list given in
the smit panel
PROBLEM CONCLUSION:
Modify code to enable the correct state_map device name to be
used.
------
APAR: IY31805 COMPID: 5765E8200 REL: 230
ABSTRACT: HAGEO/GEORM: GMD RESYNCHRONIZATION MAY CONSUME TOO MUCH KERNEL
PROBLEM DESCRIPTION:
Resynchronization of multiple GeoMirror devices in parallel
using large sync rates may fail. In some cases this may
cause a node to crash.
PROBLEM CONCLUSION:
The GeoMirror device driver has been changed to use less
kernel memory during resynchronization.
------
APAR: IY31859 COMPID: 5765D5100 REL: 330
ABSTRACT: DOUBLE FREE OF SERVICE PACKET STORAGE IN HAL_RECV_HNDLR()
PROBLEM DESCRIPTION:
In hal_recv_hndlr(), there are cases where the storage for a
service packet is freed after the packet has been placed on a
port'svirtual receive FIFO. The port thread will also free the
storage after reading the service packet from the FIFO. The
free in hal_recv_hndlr() is erroneous. The results are
indeterminate, because it depends on if/when the doubly-freed
storage is reused. One possible result is a fault-service daemon
core dump.
LOCAL FIX:
Restart the fault-service daemon after a core dump with
/usr/lpp/ssp/css/rc.switch.
PROBLEM SUMMARY:
Under some conditions, the hal_recv_hndlr() function will
free the storage used for service packets; the port thread
may later free this same storage. The results are
indeterminate; there may be data corruption or the fault
service daemon may core dump.
PROBLEM CONCLUSION:
Once a service packet is placed on the port's virtual
receive FIFO queue, the hal_recv_hndlr() function
will no longer try to free it.
------
APAR: IY31952 COMPID: 5724C3505 REL: 310
ABSTRACT: TELEPHONY.DISCONNECT NOT HANDLED CORRECTLY IN SUBDIALOG.
PROBLEM DESCRIPTION:
When catching telephony.disconnect within a sub-dialog, the
event is not handled correctly.
This then causes the same event to get generated continuously
in a loop.
PROBLEM SUMMARY:
When catching telephony.disconnect within a
sub-dialog, the event is not handled correctly.
This then causes the same event to get generated continuously
in a loop.
PROBLEM CONCLUSION:
Code change in the doInput() method.
------
APAR: IY32261 COMPID: 5724C3505 REL: 310
ABSTRACT: OUTOFBOUNDS EXCEPTION IN BROSWER MAPPER CLASS FOR FRENCH LOCALE.
PROBLEM DESCRIPTION:
OutOfBounds Exception is generated from within the French
mapper class when attempting to pronounce phone numbers under
certain conditions.
PROBLEM SUMMARY:
OutOfBounds Exception is generated from within
the French mapper class when attempting to pronounce phone
numbers under certain conditions.
PROBLEM CONCLUSION:
Code changed to correct problem
------
APAR: IY32423 COMPID: 5765D5100 REL: 330
ABSTRACT: CSS.SNAP.LOG FILE CAN BE OVERWRITTEN
PROBLEM DESCRIPTION:
css.snap.log file can be overwritten
PROBLEM SUMMARY:
If the contents of the css log directories in
/var/adm/SPlogs/css occupy more than 30% of /var, the
css.snap utility will try to free space by deleting old
css.snap files. If there are no files with names ending
in "....css.snap.tar.Z", the css.snap.log file will be
overwritten.
PROBLEM CONCLUSION:
The output of the "ls" command to list the css.snap tar
files is appended to the end of the css.snap.log file.
------
APAR: IY32424 COMPID: 5765D5100 REL: 330
ABSTRACT: TCE LEAK
PROBLEM DESCRIPTION:
tce leak
PROBLEM SUMMARY:
KHAL buffers supporting KLAPI zero copy were
released under the condition that KHAL port status is clean.
This prevented buffers from being released when port status had
certain flags, reflecting the internal KHAL status, set.
The only condition that should have been checked in the KHAL
port status is whether the port is closed.
PROBLEM CONCLUSION:
To resolve the problem, the check has been
added to KHAL function which releases KHAL buffers allocated
in support if KLAPI zero copy operation. The check verifies
that the buffers are released under any circumstances except
for that the KHAL port is closed.
------
APAR: IY32425 COMPID: 5765D5100 REL: 330
ABSTRACT: UNINITIALIZED VARIABLE IN COPY MACRO
PROBLEM DESCRIPTION:
uninitialized variable in copy macro
PROBLEM SUMMARY:
There is a variable used without initialized. This may
course some unpredicable problem like data corruption.
PROBLEM CONCLUSION:
Initialize the variable before using it.
------
APAR: IY32437 COMPID: 5765D5100 REL: 330
ABSTRACT: SP SWITCH2 WORM RUNS SLOW UNDER HEAVY PAGING LOAD
PROBLEM DESCRIPTION:
The current SP Switch2 Worm uses popen() to invoke the sum
command on the current compressed topology file. The result of
the sum command is used to determine if an updated copy of the
topology file needs to be sent to the node. Under heavy paging
load, the time necessary for popen() to do a fork to invoke ksh,
and then ksh to do a fork to invoke sum, can be excessive. If
the Worm does not report back fast enough, when it receives
a NODE_INIT packet, the primary will drop the node off of the
switch.
LOCAL FIX:
None, really. The node is normally still okay. There shouldn't
be any problem bringing it back on the switch, via Eunfence.
But, the damage is already done.
PROBLEM SUMMARY:
Nodes can drop off the SP Switch 2 when they are under
a heavy load (e.g. high levels of paging). The time
taken to call the AIX sum command to calculate the
switch topology file checksum may be too long under high
load conditions, causing the primary node to drop the
slow responding node off the switch.
PROBLEM CONCLUSION:
The fault_service_Worm_RTG_CS code has been changed to
calculate the checksum of the switch topology file
directly instead of calling the AIX sum command.
------
APAR: IY32503 COMPID: 5765E6900 REL: 310
ABSTRACT: TASKS GUIDE NOT WORKING AS IT SHOULD
PROBLEM DESCRIPTION:
Tasks guide not working as it should.
PROBLEM SUMMARY:
When cancelling from Config Tasks without having made any
changes, you may see a dialog warning you that you have made
changes that have not been saved. This happens when no
values are specified and defaults are used for scheduler_type
or enforce_resource_submission.
PROBLEM CONCLUSION:
Code was changed so that setting the radio buttons from the
defaults does not look the same as the user selecting the
default radio buttons.
------
APAR: IY32514 COMPID: 5765B8100 REL: 230
ABSTRACT: STICKING IS'S IN SS7_INTERFACE FOLLOWING A CHP ABORTION
PROBLEM DESCRIPTION:
When DT detects a CHP failure it sends an SL_CALL_ABORT_REQ
to sS7_INTERFACE and it in turn terminates the call. However
it is not freeing up the circuits.
PROBLEM SUMMARY:
When DT detects a CHP failure it sends an
SL_CALL_ABORT_REQ to sS7_INTERFACE and it in turn terminates
the call. However it is not freeing up the circuits.
PROBLEM CONCLUSION:
Code modification to rmi/rmi_cp_api.c and
rmi/rmi_sl_api.c to handle SL_ABORT occur in the middle of a
call.
------
APAR: IY32545 COMPID: 5724C3505 REL: 310
ABSTRACT: DEVICE DRIVER BROOKTROUT FILE PERMISSION PROBLEM
PROBLEM DESCRIPTION:
tsSCTSASSIGN_BTFAX: exiting with rc: RC_RESET_FAILED
PROBLEM SUMMARY:
Device Driver tsSCTSASSIGN_BTFAX: exiting with
rc: RC_RESET_FAILED
PROBLEM CONCLUSION:
Changed code to set permissions correctly
------
APAR: IY32546 COMPID: 5724C3505 REL: 310
ABSTRACT: DEFUNCT PROCESSES BEING CREATED BY BROOKTROUT CUSTOM SERVER
PROBLEM DESCRIPTION:
Defunct processes being created by the Brooktrout fax custom
server
PROBLEM SUMMARY:
Defunct process being created by the
Brooktrout fax custom server
PROBLEM CONCLUSION:
The function childterm() now calls waitpid()
to ensure that child processes which process fax jobs taken
from the queue are correctly disposed of when they have run
to completion rather than accumulating in the process table
as zombie or defunct processes.
------
APAR: IY32578 COMPID: 5765E0300 REL: 711
ABSTRACT: INTERNAL APAR FOR XLF RUNTIME PTF 7.1.1.3
PROBLEM DESCRIPTION:
Internal APAR for xlf runtime ptf 7.1.1.3
------
APAR: IY32599 COMPID: 5724C3505 REL: 310
ABSTRACT: ICM CERTIFICATION TO VERSION 4.6.1 FOR GEOTEL
PROBLEM DESCRIPTION:
GeoTel custom server needs to be upgraded to support
the latest version of Cisco ICM.
PROBLEM SUMMARY:
GeoTel custom server needs to be upgraded to
support the latest version of Cisco ICM.
PROBLEM CONCLUSION:
The fix for this feature was to modify some
of the existing parameter handling,to add two new messages and
to modify existing messages to comply with the new
specification for Cisco ICM version 4.6.1
------
APAR: IY32625 COMPID: 5765D5100 REL: 340
ABSTRACT: LATEST PSSP 3.4.0 FIXES AS OF JUNE 2002
PROBLEM DESCRIPTION:
This is the lastest PSSP ptf as of June 2002.
Order this apar to get all of the ptfs as of May 2002.
PROBLEM SUMMARY:
This is a packaging apar for PSSP 3.4.0 fixes
as of June 2002.
------
APAR: IY32660 COMPID: 5765E0300 REL: 711
ABSTRACT: INTERNAL APAR FOR XLF RUNTIME FOR AIX51 PTF 7.1.1.3
PROBLEM DESCRIPTION:
Internal APAR for xlf runtime for AIX43 ptf 7.1.1.3
------
APAR: IY32661 COMPID: 5765E0300 REL: 711
ABSTRACT: INTERNAL APAR FOR XLF RUNTIME FOR AIX43 PTF 7.1.1.3
PROBLEM DESCRIPTION:
Internal APAR for xlf runtime for AIX43 ptf 7.1.1.3
------
APAR: IY32662 COMPID: 5765E0300 REL: 711
ABSTRACT: INTERNAL APAR FOR XLF RUNTIME FOR AIX41 PTF 7.1.1.3
PROBLEM DESCRIPTION:
Internal APAR for xlf runtime for AIX41 ptf 7.1.1.3
------
APAR: IY32680 COMPID: 5724C3505 REL: 310
ABSTRACT: THE SECOND VXML TRANSFER ATTEMPT IN A SINGLE APP WILL FAIL AND
PROBLEM DESCRIPTION:
Customer has a VXML application which uses the transfer tag to
perform a call transfer. When the first transfer attempt fails
due to a busy line or other valid failure, the application gives
the caller the chance to try the transfer again. In this
situation, the second transfer doesn't occur and the application
appears to hang and remains in the active state.
The CPU usage on the system will also increase and remain at
approximately 50% usage.
PROBLEM SUMMARY:
THE SECOND VXML TRANSFER ATTEMPT IN A SINGLE
APP WILL FAIL AND APPLICATION WILL REMAIN ACTIVE IN A TIGHT
LOOP.
PROBLEM CONCLUSION:
Only set the onevisit flag if a transfer is
successful so that a transfer can still be made within a call
------
APAR: IY32796 COMPID: 5765D5100 REL: 330
ABSTRACT: LATEST PSSP 3.3.0 FIXES AS OF JULY 2002
PROBLEM DESCRIPTION:
This is the latest PSSP ptf as of July 2002.
Order this apar to get all of the ptfs as of July 2002.
PROBLEM SUMMARY:
This is a packaging apar for PSSP 3.3.0 fixes as of July 2002.
------
APAR: IY32852 COMPID: 5765F5600 REL: 600
ABSTRACT: JULY 2002 C++ RUNTIME PTF
PROBLEM DESCRIPTION:
July 2002 C++ Runtime PTF
------
APAR: IY32873 COMPID: 5724C3505 REL: 310
ABSTRACT: ADDITIONAL ULTIMEDIA SUPPORT
PROBLEM DESCRIPTION:
Additional UMS support
------
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic