[prev in list] [next in list] [prev in thread] [next in thread] 

List:       aix-l
Subject:    Re: node crash when we read a db2-file with more
From:       "Hunter, Mark" <Mark.Hunter () ANHEUSER-BUSCH ! COM>
Date:       2005-12-14 19:46:48
Message-ID: 200512141946.jBEJkxSe021400 () stlssgcorpmailfw1 ! anheuser-busch ! com
[Download RAW message or body]

There are many fixes for jfs file corruption that take you way past 5.2 ML2.
The last took us to ML6++.  Get them :-)

Mark Hunter
Anheuser-Busch Cos.
MIS Consultant, ES&SO Server Planning and Integration
*Office: 	(314) 632-6663
*Fax:		(314) 632-6901
*Pager: 	                (314) 841-4026
*Email:		Mark.Hunter@Anheuser-Busch.com

The information transmitted (including attachments) is covered by the Electronic
Communications Privacy Act, 18 U.S.C. 2510-2521, is intended only for the
person(s) or entity/entities to which it is addressed and may contain
confidential and/or privileged material. Any review, retransmission,
dissemination or other use of, or taking of any action in reliance upon, this
information by persons or entities other than the intended recipient(s) is
prohibited. If you received this in error, please contact the sender and delete
the material from any computer.


 

-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU] On Behalf Of
fmu@OERAG.DE
Sent: Wednesday, December 14, 2005 9:28 AM
To: aix-l@Princeton.EDU
Subject: node crash when we read a db2-file with more

Hi,

we have a problem on one of our 7026-6H1 node. The node runs with AIX 5.2
ML2 and DB2 Version 8.1 Fixpack7a
It is our DB2-Server.
Yesterday we increase the db2-tablespace and this creates two new containers
(easy_long10 and easy_long11). Always runs fine, rebalancer from
DB2 says o.k. and successfull

-rw-r-x---   1 db2igspi db2admin 2147483648 Dec 14 15:21 easy_long11.db2
-rw-r-x---   1 db2igspi db2admin 2147483648 Dec 14 15:21 easy_long10.db2
-rw-r-x---   1 db2igspi db2admin 2147483648 Dec 14 15:21 easy_long09.db2
-rw-r-x---   1 db2igspi db2admin 2147483648 Dec 14 15:21 easy_long08.db2
-rw-r-x---   1 db2igspi db2admin 2147483648 Dec 14 15:21 easy_long07.db2
-rw-r-x---   1 db2igspi db2admin 2147483648 Dec 14 15:21 easy_long06.db2
-rw-r-x---   1 db2igspi db2admin 2147483648 Dec 14 15:21 easy_long05.db2
-rw-r-x---   1 db2igspi db2admin 2147483648 Dec 14 15:21 easy_long04.db2
-rw-r-x---   1 db2igspi db2admin 2147483648 Dec 14 15:21 easy_long02.db2
 -rw-r-x---   1 db2igspi db2admin 2147483648 Dec 14 15:21 easy_long01.db2

Now when we start the more-command on one of the old files it runs, we get
output.
When we start a more on new files the node crahs complete. Here the part of the
errorlog. What can we do? Any tips?

---------------------------------------------------------------------------
LABEL:            JFS_META_CORRUPTION
IDENTIFIER: 684A365B

Date/Time:       Wed Dec 14 15:33:59 NFT
Sequence Number: 11330
Machine Id:      0056FFBA4C00
Node Id:         helios
Class:           U
Type:            UNKN
Resource Name:   SYSPFS
Resource Class:  NONE
Resource Type:   NONE
Location:
VPD:

Description
FILE SYSTEM CORRUPTION

Probable Causes
INVALID FILE SYSTEM CONTROL DATA

 Recommended Actions
 PERFORM FULL FILE SYSTEM RECOVERY USING FSCK UTILITY  OBTAIN DUMP  CHECK ERROR
LOG FOR ADDITIONAL RELATED ENTRIES

Failure Causes
ADAPTER HARDWARE OR MICROCODE
DISK DRIVE HARDWARE OR MICROCODE
SOFTWARE PROGRAM
STORAGE CABLE LOOSE, DEFECTIVE, OR UNTERMINATED

 Recommended Actions
 CHECK CABLES AND THEIR CONNECTIONS
 INSTALL LATEST ADAPTER AND DRIVE MICROCODE  INSTALL LATEST STORAGE DEVICE
DRIVERS  IF PROBLEM PERSISTS, CONTACT APPROPRIATE SERVICE REPRESENTATIVE

Detail Data
FILE NAME
v_mapsubs.c
LINE NO.
         397
MAJOR/MINOR DEVICE NUMBER
0034 000F
ADDITIONAL INFORMATION
4A46 5345 43A0 2D57 0000 0012 0000 0020 0003 1214 0000 0000 0000 0000 0000 000A
1A54 96B0 0000 0020 0005 8756 0000 0400 0024 8092 0000 0041 006B 7E40 C004
1008
0000 0042 5B93 9CB6 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
---------------------------------------------------------------------------
[prev in list] [next in list] [prev in thread] [next in thread]