[prev in list] [next in list] [prev in thread] [next in thread] 

List:       aix-l
Subject:    Re: How to let one node know all the disks in 7133-D40 ?
From:       "Green, Simon" <Simon.Green () EU ! ALTRIA ! COM>
Date:       2004-01-29 10:22:25
Message-ID: D4AE64E989E7D411A8540001FAD48E2D07721ACF () kjsgbcheshrexc2 ! eu ! pm ! com
[Download RAW message or body]

A new 7133-D40 should have all cards set to bypass mode.
For others, I normally set bypass mode in the hardware: physically move the
jumpers.
You can do it through software using the SSA Service aids, which you get to
through diag.
--
Simon Green
Altria ITSC Europe Ltd

AIX-L Archive at https://new-lists.princeton.edu/listserv/aix-l.html

New to AIX? http://publib-b.boulder.ibm.com/redbooks.nsf/portals/UNIX

N.B. Unsolicited email from vendors will not be appreciated.
Please post all follow-ups to the list.

> -----Original Message-----
> From: cuihh cuihh [mailto:cuihh6@HOTMAIL.COM]
> Sent: 28 January 2004 02:37
> To: aix-l@Princeton.EDU
> Subject: How to let one node know all the disks in 7133-D40 ?
>
>
> 7133-D40, 9.1G x 16 disks
> I want to make all the 16 disks known to a host with an ssa adapter.
> I know the bypass mode should be set between 4&5,8&9,12&13.
> But don't know
> how to achieve the goal ? Through smitty or any commands ?
> Please tell me the smitty fastpath or the relative commands, Thanks.
[prev in list] [next in list] [prev in thread] [next in thread]