[prev in list] [next in list] [prev in thread] [next in thread] 

List:       aic7xxx
Subject:    Many SCSI errors
From:       Derek Yeung <dky () utcc ! utoronto ! ca>
Date:       2003-08-19 16:43:59
[Download RAW message or body]



Hello everyone,

I currently have an Intel SE7501WV2 (with AIC-7902) and a 39320D-R running
on RedHat Linux 9 (stock kernel 2.4.20-19smp, stock drivers)

I'm attaching 5 Ultra320 73.4 GB + 1 Ultra160 36GB, and all are seagate
(10Krpm) disks and attached in one chain.  The first problem is when i
copy data from the Ultra160 disk onto one of teh ultra360 disks.  I seem 
to be getting a lot of the following errors:

Aug 17 15:04:26 bureau18 kernel: SCSI disk error : host 1 channel 0 id 9 
lun 0 return code = 8000002
Aug 17 15:04:26 bureau18 kernel: Info fld=0x1841ef, Current sd08:51: sense 
key Aborted Command
Aug 17 15:04:26 bureau18 kernel: Additional sense indicates Information 
unit CRC error detected
Aug 17 15:04:26 bureau18 kernel:  I/O error: dev 08:51, sector 1589680


I've also got quite a bit of these of varying nature too:

Aug 17 15:10:06 bureau18 kernel: scsi1: Transmission error detected
Aug 17 15:10:06 bureau18 kernel: scsi1: lqistat1 == 0x0, LASTPHASE == 
0x01, curphase = 0x60, perrdiag == 0x4
Aug 17 15:10:06 bureau18 kernel: scsi1: Dumping Card State at program 
address 0x4b Mode 0x22
Aug 17 15:10:06 bureau18 kernel: Softc pointer is f7fc8000
Aug 17 15:10:06 bureau18 kernel: IOWNID == 0x7, TOWNID == 0x7, SCSISEQ1 == 
0x12
Aug 17 15:10:06 bureau18 kernel: SCSISIGI == 0xb6
Aug 17 15:10:06 bureau18 kernel: QFREEZE_COUNT == 0, SEQ_FLAGS2 == 0x1
Aug 17 15:10:06 bureau18 kernel: Card was paused
Aug 17 15:10:06 bureau18 kernel: scsi1: LASTSCB 0x2 CURRSCB 0x2 NEXTSCB 
0x0 SEQINTCTL 0x0
Aug 17 15:10:06 bureau18 kernel: SCSISEQ = 0x0
Aug 17 15:10:06 bureau18 kernel: SCB count = 4
Aug 17 15:10:06 bureau18 kernel: Kernel NEXTQSCB = 2
Aug 17 15:10:06 bureau18 kernel: scsi1: LQCTL1 = 0x0
Aug 17 15:10:06 bureau18 kernel: scsi1: WAITING_TID_LIST == 0xfffc:0xff02
Aug 17 15:10:06 bureau18 kernel: scsi1: WAITING_SCB_TAILS: 0(0xff00) 
1(0xff00) 2(0xff00) 3(0xff00) 4(0xff00) 5(0xff00) 6(0xff00) 7(0xff00) 
8(0xff02) 9(0xff02) 10(0xff02) 11(0xff00) 12(0xff02) 13(0xff02) 14(0xff00) 
15(0xff00)
Aug 17 15:10:06 bureau18 kernel: qinstart = 108 qinfifonext = 108
Aug 17 15:10:06 bureau18 kernel: QINFIFO:
Aug 17 15:10:06 bureau18 kernel: WAITING_TID_QUEUES:
Aug 17 15:10:06 bureau18 kernel: Pending list:
Aug 17 15:10:06 bureau18 kernel:   2(CTRL 0x60 ID 0x97 N 0xffc0 N2 0xfffc 
SG 0x37fc4808, RSG 0x37fc4808, KSG 0x37fc480a)
Aug 17 15:10:06 bureau18 kernel:
Aug 17 15:10:06 bureau18 kernel: Kernel Free SCB list: 1 0
Aug 17 15:10:06 bureau18 kernel: Sequencer Complete DMA-inprog list:
Aug 17 15:10:06 bureau18 kernel: Sequencer Complete list:
Aug 17 15:10:06 bureau18 kernel: Sequencer DMA-Up and Complete list:
Aug 17 15:10:06 bureau18 kernel: scsi1: SIMODE1 = 0xac
Aug 17 15:10:06 bureau18 kernel: scsi1: LQISTAT0 = 0x0, LQISTAT1 = 0x0, 
LQISTAT2 = 0xc0
Aug 17 15:10:06 bureau18 kernel: scsi1: LQOSTAT0 = 0x0, LQOSTAT1 = 0x0, 
LQOSTAT2 = 0x81
Aug 17 15:10:06 bureau18 kernel: scsi1: FIFO0 Free, LONGJMP == 0x80ff, SCB 
0x2, LJSCB 0xff00
Aug 17 15:10:06 bureau18 kernel: scsi1: SEQIMODE == 0x3f, SEQINTSRC == 0x0
Aug 17 15:10:06 bureau18 kernel: scsi1: DFCNTRL == 0x0, DFSTATUS == 0x89, 
SG_CACHE_SHADOW = 0x2, SG_STATE = 0x0
Aug 17 15:10:06 bureau18 kernel: SSTAT0 = 0x2, SSTAT1 = 0x19, SSTAT2 = 
0x20
Aug 17 15:10:06 bureau18 kernel: DFFSXFRCTL = 0x0, SOFFCNT = 0x0
Aug 17 15:10:06 bureau18 kernel: MDFFSTAT = 0x5, SHADDR = 0x0, SHCNT = 0x0
Aug 17 15:10:06 bureau18 kernel: HADDR = 0x0, HCNT = 0x0
Aug 17 15:10:06 bureau18 kernel: CCSGCTL = 0x10
Aug 17 15:10:06 bureau18 kernel: sg[0] - Addr 0x03616c000 : Length 4096
Aug 17 15:10:06 bureau18 kernel: scsi1: FIFO1 Active, LONGJMP == 0x230, 
SCB 0x2, LJSCB 0x2
Aug 17 15:10:06 bureau18 kernel: scsi1: SEQIMODE == 0x3f, SEQINTSRC == 0x0
Aug 17 15:10:06 bureau18 kernel: scsi1: DFCNTRL == 0x8, DFSTATUS == 0x89, 
SG_CACHE_SHADOW = 0xb, SG_STATE = 0x0
Aug 17 15:10:06 bureau18 kernel: SSTAT0 = 0x2, SSTAT1 = 0x19, SSTAT2 = 
0x23
Aug 17 15:10:06 bureau18 kernel: DFFSXFRCTL = 0x0, SOFFCNT = 0x0
Aug 17 15:10:06 bureau18 kernel: MDFFSTAT = 0x16, SHADDR = 0x3616d000, 
SHCNT = 0x0
Aug 17 15:10:06 bureau18 kernel: HADDR = 0x3616d000, HCNT = 0x0
Aug 17 15:10:06 bureau18 kernel: CCSGCTL = 0x10


Could someone please provide some suggestions on what's wrong and how I 
can go about fixing it?  

I've got another machine with the updated driver from Justin Gibbs -- but
during boot, i still see

bureau18 kernel: scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.0.0

Should I do an rpm -ivh or a rpm -Uvh to install the driver?  

Thank you very much,
/dky



[prev in list] [next in list] [prev in thread] [next in thread]