[prev in list] [next in list] [prev in thread] [next in thread] 

List:       adsm-l
Subject:    Re: AUTOLABEL not working
From:       Marco Malgarini <marco () malgarini ! org>
Date:       2006-02-25 10:50:59
Message-ID: 000501c639f9$5d68ff80$0200a8c0 () itfclink ! health ! qld ! gov ! au
[Download RAW message or body]

How many barcode digits are you presenting to Tivoli?
It might be an issue if you present only 6 and don't present the volume type
qualifier L2 or L1.
Had a similar problem with a HP EML245 on the same TSM version

Kind Regards

Marco Malgarini

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
William Boyer
Sent: Saturday, 25 February 2006 06:10 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] AUTOLABEL not working

TSM Server 5.3.2.2 on Windows 2003 server
Dell Powervault 136T library with IBM LTO-2 drives.

If I put the tapes in and run a LABEL LIBV they label just fine. If we
insert unlabeled tapes in the library, when TSM mounts one,
gives the I/O error reading tape label but then puts the volume in PRIVATE
status to prevent re-access. The library is configured
AUTOLABEL=YES.

The only thing I can think of is that the drives are LTO2 and all the tapes
they are using are LTO1. It's a hand me down system.
They had the tapes from an old Veritas implementation and their parent
company gave them the library. And they don't have budget to
buy all new LTO2 tapes.

The devclass is set as FORMAT=DRIVE.

Any ideas? I searched ADSM-L and IBM without success...but I may not have
hit on the right combination of keywords for the query..

Bill Boyer
"Growing old is mandatory, growing up is optional" - ??
[prev in list] [next in list] [prev in thread] [next in thread]