[prev in list] [next in list] [prev in thread] [next in thread]
List: 9fans
Subject: [9fans] pcmcia
From: Skip Tavakkolian <9nut () 9netics ! com>
Date: 2010-03-25 18:29:21
Message-ID: ea1aafb33b7d943d06833595f6d0f23d () 9netics ! com
[Download RAW message or body]
i need a second nic on a lenovo T61p that is a combo cpu. i have a
few linksys ec2t pcmcia cards; i tried using it (added
"ether1=type=ec2t" to plan9.ini). on some boots it freezes after
printing the memory layout; at other times cpu0 exits instead. i
found a discussion from 2008 related to the pcirouting error message;
i think Erik concluded was due to 9load. is it likely they're
related? any ideas?
here's part of what's in /dev/kmesg:
cpu0: 2196MHz GenuineIntel Xeon5000-series (cpuid: AX 0x06FB DX 0xBFEBFBFF)
ELCR: 0C00
pcirouting: Cannot find south bridge PCI.255.31.7
#Y0: Ricoh 476 PCI/Cardbus bridge, F8100000 intl 10
#l0: i82566: 1000Mbps port 0xFE200000 irq 11: 001e371e26dc
2031M memory: 109M kernel data, 1921M user, 2546M swap
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic