[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-netdev
Subject: [PATCH 1/2] Fix copper/fiber auto-selection for 88e1111
From: Wang Jian <lark () linux ! net ! cn>
Date: 2008-07-16 13:46:17
Message-ID: 487DFBA9.8070400 () linux ! net ! cn
[Download RAW message or body]
The 27.15 bit (MII_M1111_HWCFG_FIBER_COPPER_AUTO) is disable bit. When
set to 1, copper/fiber auto selection is disabled. The current code
to enable but actually disable auto selection.
Signed-off-by: Wang Jian <lark@linux.net.cn>
---
drivers/net/phy/marvell.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 32a8503..737512c 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -162,7 +162,7 @@ static int m88e1111_config_init(struct phy_device
*phydev)
/* Enable Fiber/Copper auto selection */
temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
- temp |= MII_M1111_HWCFG_FIBER_COPPER_AUTO;
+ temp &= ~MII_M1111_HWCFG_FIBER_COPPER_AUTO;
phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
temp = phy_read(phydev, MII_BMCR);
--
1.5.5.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic